Specifications

XCMG Motor Grader GR135
1. Enging: 6BT5.9-C
2. Rated power/rated speed: 100kW(135hp)/2200rpm

XCMG Motor Grader GR135

 

Feature

 

The XCMG GR Series Motor Graders are mainly used in grond leveling, canalling, slopeing, earthmoving, scarification or snow removal work on road, airfield, farmland, and so on. They are necessary construction machines for national defence engineering, mine construction, town and country roads building, and farmland improvement.

 

Performance and characteristic:

 

1.      New appearance design.

2.      The articulation frame is adopted and macthed with the steering of the front wheel, with small turning radius, maneuvering and flexible.

3.      The electro-hydraulic contrals the power shift gearbox, with 6 ahead box and 3 back gears.

4.      The international mataching hydraulic parts are adopted, with reliable operation.

5.      The motions of the knife are fully hydraulically controlled.

6.      The rear axle is the three-section driving axle which is provide with the NO-SPIN self-locking differential mechanism.

7.      The manipulation table and seats are adjustable. The arrgement of the manipulation handle and instruments are reasonable, with convenient application, and the comfprt of driving is improved.

8.      The cab is grand and nice, with wide eyeshot and good sealing.

9.      The front bolldozing plate,rear scarification device, front scarification harrow and automatic leveling device can be added. 

 

Main technical specification

 

Basic specification
Engine model	6BT5.9
Rated power/speed	100/2200kw/rpm
Dimension(LxWxH)	8015×2380×3050mm
Operating weight(Standard)	11000kg
Performance specification
Travelling speed, forward	5, 8, 13, 20, 30, 42km/h
Travelling speed, reverse	5, 13, 30km/h
Tractive force(f=0.75)	61.3KN
Max. gradeability	20%
Tire inflation pressure	300kPa
Working hydraulic pressure	16MPa
Transmission pressure	1.3~1.8MPa
Operating specification
Max. steering angle of front wheels	±49°
Max. lean angle of front wheels	±17°
Max. oscillation angle of front axle	±15°
Max. oscillation angle of balance box	16
Frame articulation angle	±27°
Min. turning radius using articulation	6.6m
Blade
Maximum lift above ground	410mm
Maximum depth of cutting	535mm
Maximum blade position angle	90°
Blade cutting angle	28°—70°
Circle reversing rotation	360°
Moldboard width X height	3710×610mm

 

Thank you for your inquiry!