Quick Details

Product Raw Material:

Fabric: Thermoplastic polyurethane
Adhesive: Pressure Sensitive Adhesive

Backing paper: white or light yellow

Type:

Tarp tape repair tarpauline patch

Size:

Custom size available:

60x60 mm

70x70 mm

3 inch diameter

Up to 10 m roll

Application(s):

Tarpauline adhesive tape to repair rips and tears in tarps and tarpaulines.

Regulations:

Adhesive passes ASTM F963-11, CPSIA, CPSA, REACH 17P, REACH 144 SVHC, CHCC, EN71 PART3:2013, RoHS, PAHs, and more!

Company Certificates:

ISO9001-2008 Quality Management System;
ISO14001:2004 Environmental Management System

Customization

- Custom patches of any size and color.
- Adjustable glue thickness, adhesion and cohesion.

- Cutting and printing service available.

- Custom packaging of blister pack, double blister pack, paper box, plastic container, bulk pack, etc.

Physical Properties

Appearance:

Semi-transparent color

Glue Main Ingredient:

Polyacrylate

Odor:

Odorless

Properties:

- Made with industrial-strength adhesive.
- Provides easy and quick repairs – simply peel and patch!

- Underwater repair -- apply in wet or dry conditions.
- Fast curing, watertight and durable.

Glue Adhesion and Cohesion:

Adjustable

Glue Thickness:

0.04~0.08mm, adjustable

Curing Time:

Ready to use in 20~30 minutes
Fully cure in 4 hours

Reactivity:

Stable under normal storage and handling conditions

Chemical Stability:

Stable under normal temperatures and pressures

Storage:

Store the product in a cool (32~120°F; 0~49ºC), dry and well-ventilated place. Keep container tightly closed. Keep away from food and drinks. Keep out of the reach of children. Do not allow material to be released to the environment without proper governmental permits.

Application Guidelines

Operating Temperature:

50~104°F (10~40ºC)

Method of Application:

Peel and stick

Instruction:

1. Use only in well-ventilated area. General indoor ventilation may be adequate. Optimal temperature for application is 50~104°F (10~40ºC).

2. Clean the surface to be repaired thoroughly and keep dry. It is recommended to wipe off the dust/ oil with 50% alcohol solution.

3. Peel off the backing paper and stick the patch to the surface, fully covering the leaks/seams/holes/slits. Press firmly to force out any air bubbles.

4. Wait 20~30 minutes before re-inflating or re-use the product. It takes 4 hours for the adhesive to fully cure.

Cleanup:

Collect and discard in accordance with all applicable regulations.

Precautions:

There is no particular risk for repairing articles during normal operating, but direct contact or repeated exposure may cause skin irritation, serious eye irritation and respiratory irritation.
Do not swallow. Avoid eye contact or skin contact. Avoid touching adhesive side of patch. Avoid breathing vapors and use only in well-ventilated area.
After handling, take off contaminated clothing and wash hands thoroughly.
Material may catch fire if exposed to ignition sources and flame.

First-Aid:

In case of skin contact, wash skin with soap and plenty of water for at least 15 minutes. Consult physician if symptoms persist.
In case of eye contact, flush eye(s) cautiously with plenty of water for at least 5 to 10 minutes. Remove contact lenses if safe and easy to do. Consult physician if symptoms persist.
In case of inhalation, remove victim to fresh air area immediately.
If swallowed, do not induce vomiting. Give 2-4 cupfuls of milk or water if victim is conscious and alert. Consult physician immediately.
In case of fire, use media suitable to the surrounding fire, such as water spray, carbon dioxide, foam or dry chemical.