Quick Details

Product Raw Materials:

Adhesive: Neoprene Glue

Type:

Rubber Contact Cement Neoprene Glue

Size:

7 ml

Modal Number:

Shelf Life

12 months

Application(s):

- Repairs cuts and splits in neoprene fabric.

- Repairs leather, rubber, wood, etc.
- Repairs wetsuit, drysuit, fishing wader, etc.

Company Certificates:

ISO9001:2008 Quality Management System;
ISO14001:2004 Environmental Management System

Customization:

- Custom specifications of aluminum packaging tube.
- 4-color offset print on aluminum packaging tubes with client’s logo and design.
- Latex bands of varying width from the tube base available to prevent adhesive leakage.
- Custom plastic cap of any size, color and shape.
- Custom packaging of blister pack, double blister pack, paper box or plastic box, etc.
- Tactile warning labels for the blind available.
- Production date marked on tube.

Physical Properties

Appearance:

Semi yellow transparent liquid

Main Ingredients:

Chloroprene resin, Toluene, Ethyl Acetate, M.E.K., Petroleum Ether

Odor:

Ketone odor

Properties:

- Contact adhesive for repairs to neoprene fabric in 5 minutes.
- Seam sealing and repairing cuts and leaks in wetsuit.

Curing Time:

Dry to touch in 5 to 10 minutes;
Fully dry out and cure in 4 hours.

Boiling Point:

148.82°F (64.9ºC)

Flash Point:

14°F (-10ºC)

Vapor Pressure:

3.5715 Kpa

Vapor Density (Air=1):

2.77

Specific Gravity (H2O=1):

0.91

Explosion Limits:

2.5% to 13%

Water Solubility:

Insoluble in water

Stability:

Stable at normal temperature and pressures.

Storage:

Should be stored in a cool, dry and well ventilated area. Keep away from sources of ignition. Storage temperature should be between 41°F ( 5 ºC) and 104°F (40 ºC) indoors. Keep out of the reach of children.

Application Guidelines

Operating Temperature:

50~104°F (10~40ºC)

Method of Application:

Nylon brush, plastic scraper or glue spreader

Instructions:

How to make the wetsuit repair?

1. Locate the slit of the wetsuit.

2. Clean the area around the slit using isopropyl alcohol patch. Keep the area dry.

3. Take off the tube cap of neoprene cement and put on an applicator nozzle. Squeeze the aluminum tube gently. Apply cement directly to the slit area if the slit is smaller than 5 mm diameter. In case the slit is larger than 5 mm diameter, it is suggested to apply cement on and around the slit.

4. Hold the slit area in place as the neoprene cement bonds. Press the edges into each other if necessary.

5. Allow the neoprene cement to harden and cure for 20~30 minutes. Now the wetsuit is ready for use again!

Precautions:

Use only in well-ventilated area and do not expose container to heat or flame. Wash thoroughly after handling. Avoid contact with eyes, skin and clothing. Do no ingest or inhale. Ensure sufficient exhaust ventilation in the working area. Prevent from breathing of vapor or swallowing.
May cause severe eye irritation. May cause mild skin irritation. May be harmful if inhaled. Vapor may cause irritation of nose, throat and lungs. Harmful if swallowed.