Neoprene based adhesive, neoprene contact adhesive
Negotiable /Piece
Min.Order:3000 Pieces
Guangzhou Shin Dorn Plastics Toy Co., Ltd.
Neoprene based adhesive, neoprene contact adhesive
Main Features:
1. Best quality neoprene-based adhesive for neoprene fabric, leather, rubber and wood.
2. Fast curing, sealing and waterproofing small stitched seams and leaks.
3. Custom specifications / OEM available.
4. Factory direct sells, offering you the most competitive pricing!
5. Our clients include: Aerobed, Bell, Bestway, Coleman, Dollar Tree, Dorel, Intex, Poolmaster, Royalbeach, Rubbermaid, Sevylor, Stormsure, Wal-mart, and more!
Quick Details | Neoprene based adhesive, neoprene contact adhesive |
Product Raw Materials: | Adhesive: Neoprene Adhesive
|
Type: | Neoprene Adhesive |
Size: | 7 ml |
Modal Number: | |
Shelf Life | 12 months |
Application(s): | - Repairs cuts and splits in neoprene fabric. - Repairs leather, rubber, wood, etc. |
Company Certificates: | ISO9001:2008 Quality Management System; |
Customization: | - Custom specifications of aluminum packaging tube. |
Physical Properties | |
Appearance: | Semi yellow transparent liquid |
Main Ingredients: | Chloroprene resin, Toluene, Ethyl Acetate, M.E.K., Petroleum Ether |
Odor: | Ketone odor |
Properties: | - Contact adhesive for repairs to neoprene fabric in 5 minutes. |
Curing Time: | Dry to touch in 5 to 10 minutes; |
Boiling Point: | 148.82°F (64.9ºC) |
Flash Point: | 14°F (-10ºC) |
Vapor Pressure: | 3.5715 Kpa |
Vapor Density (Air=1): | 2.77 |
Specific Gravity (H2O=1): | 0.91 |
Explosion Limits: | 2.5% to 13% |
Water Solubility: | Insoluble in water |
Stability: | Stable at normal temperature and pressures. |
Storage: | Should be stored in a cool, dry and well ventilated area. Keep away from sources of ignition. Storage temperature should be between 41°F ( 5 ºC) and 104°F (40 ºC) indoors. Keep out of the reach of children. |
Application Guidelines | |
Operating Temperature: | 50~104°F (10~40ºC) |
Method of Application: | Nylon brush, plastic scraper or glue spreader |
Instructions: | How to make the wetsuit repair? 1. Locate the slit of the wetsuit. 2. Clean the area around the slit using isopropyl alcohol patch. Keep the area dry. 3. Take off the tube cap of neoprene cement and put on an applicator nozzle. Squeeze the aluminum tube gently. Apply cement directly to the slit area if the slit is smaller than 5 mm diameter. In case the slit is larger than 5 mm diameter, it is suggested to apply cement on and around the slit. 4. Hold the slit area in place as the neoprene cement bonds. Press the edges into each other if necessary. 5. Allow the neoprene cement to harden and cure for 20~30 minutes. Now the wetsuit is ready for use again! |
Precautions: | Use only in well-ventilated area and do not expose container to heat or flame. Wash thoroughly after handling. Avoid contact with eyes, skin and clothing. Do no ingest or inhale. Ensure sufficient exhaust ventilation in the working area. Prevent from breathing of vapor or swallowing. |