Name: Rapid heating & cooling sliding tube furnace RTP vacuum tube furnace
Brand: CYKY
Availability: InStock

Product Details

RTP- Standard Compact RTP Tube Furnace with 4" Quartz Tube

Introduction of the sliding RTP tube furnace

CYKY-OTF-1200X-80SL is a CE certified slide-able tube furnace with 3"IDx55" L quartz tube and flanges and a maximum working temperature up to 1200°C. One pair of sliding rail is installed on bottom of furnace to allow sliding the furnace from one side to another to achieve max. heating and cooling rates up to 100°C/min. For fastest heating, the furnace may be pre-heated to a desired temperature and then be slided to the sample's position. As for fastest cooling, the furnace can be slided to another side after sample heating is completed. Moreover, the heating and cooling rates may reach 15°C/s under vacuum or inert gases. This furnace provides an alternative for rapid thermal processing at the lowest cost.

Specification of the sliding RTP tube furnace / RTP- Standard Compact RTP Tube Furnace with 4" Quartz Tube

Furnace Structure

Double layer steel structure with dual air cooling fans
One pair of sliding rails are installed on bottom of furnace, which allows furnace to be manually moved from side to side
Slding rail length is about 1200mm, the furnace can slide 600 mm distance

Power

2.5KW

Voltage

AC 208-240V Single Phase, 50/60 Hz

Max. Temperature

1200°C (<1 hour)

Continuous Temperature

1100°C

Heating& Cooling Rates

Heating Rate:

15°C/sec (RT - 150°C);

10°C/sec (150°C - 250°C);

7°C/sec (250°C - 350°C);

4°C/sec (350°C - 500°C);

3°C/sec (350°C - 550°C);

2°C/sec (550°C - 650°C);
1°C/sec (650°C - 800°C);
0.5°C/sec (800°C - 1000°C);

Cooling Rate:

15°C/sec (1000 - 950°C);

10°C/sec (950°C - 900°C);

7°C/sec (900°C - 850°C);

4°C/sec (850°C - 750°C);

2°C/sec (750°C - 600°C);
1.5°C/sec (600°C - 500°C);
1°C/sec (500°C - 400°C);
0.5°C/sec (400°C - 300°C);

Note:
The max heating and cooling rate is achieved by pre-heat one side

of processing tube to the target temperature and then slide the

furnace to the other side. You may choose to place t

he sample in the pre-heat area or not.

Heating Zone Length

440mm ( single zone )

Constant Temperature Zone

120mm (+/-1°C @ 400-1200°C)

Heating Elements

Fe-Cr-Al Alloy doped by Mo

Processing Tube Size

High purity fused quartz tube

Size: OD: 3.2" x ID: 3.0" x Length: 55" (inch) or OD: 80 x ID 75 x Length 1400 ( mm)

Two foam ceramic blocks are included which must be placed inside tube to avoid heat radiation damaging O-ring

Temperature Controller

PID automatic control with 30 programmable segments for precise control of heating rate, cooling rate and dwell time.
Built-in over temperature alarm and protection allows for operation without attendant.

Temperature Accuracy

+/ - 1°C

Vacuum Flanges