Name: Laboratory used liquid heating or evaporating deliver system for CVD furnace / LVD
Brand: CYKY
Availability: InStock

Product Details

Laboratory used liquid heating or evaporating deliver system for CVD furnace / LVD

Product Description

CYKY-LVD-F1 is a compact, precising & cost effective liquid heating or evaporating deliver system for lab scale CVD furnace. Different with conventional bubbler, LVD-F1 's Liquid flow and vapor flow are controlled precisely by a digital liquid pump up to 80ml/ minute with +/- 0.005 ml accuracy. Liquid goes through a heater by controlling the inert gas, and becomes vapor instantly to CVD processing into a tube furnace. LQD-F1 can deliver many organic compounds and all types of liquids, such as ETOH, SnCl4, TiCl4r, SiHCl3, and Zn(C2H5)2 etc., without worrying about corrosion. It is an ideal tool for CVD processing of nano wire and film in material research.

Specification of the Compact Liquid Heating or Vaporization Systems

Product	Compact Liquid Heating or Vaporization Systems
Power Input	208 - 240VAC, single phase, 50/60Hz ( standard ) 1000 W Power consumption 110V is available with a transformer
Liquid Flow Control	Precision digital control with +/- 0.01% FS accuracy Flow rate arrange : 0 - 80 ml/minute adjustable ( min. rate: 0.1 ml/min ) Liquid can be soaked from a container ( not included ) automatically.
Heater & Temperature controller	Liquid and carrying gas are go through a SS316 coil, which is heated by a built in small furnace upto 250oC One heating tape ( 18mm W x 1000mm L) is included to prevent output vapor from condensing on tube or flange ( max. temperature 150oC) Two 30 segment programmable Digital temperature controllers with +/- 1 CC accuracy are built in to control gas heater and heating tape separately
Gas flow control	carrying gas is controlled by a precision flow-meter Gas flow rate: 0 - 2000 ml/minute adjustable Pressure gauge built in front panel Two SS needle valves are installed to control gas in and out Vapor Gas outlet tube size: 1/4"OD SS316 Optional: Digital Mass Flow Control is available upon request at extra cost Note: 1/4'' PTFE tube, 1/4'' SS tube and beaker are not included, customers need to prepared them according to your own experimental needs.
Oxygen Monitoring	An Oxygen Sensor can be used to monitor the oxygen level of gas(es) used in CVD systems for preventing or reducing oxidation.
Application note	This system can fit with all tube furnace and CVD furnace
Dimension & Weight	Heater & Gas Control Unit: 350L x 335W" x 300H, mm Net weight: 5 Kg
Warranty	One year limited and extended warranty available upon request