DSS7666

Two phase three wire electronic energy meter

Operation instruction

Ecuador electronic energy meter

BEST PRODUCTS WITH CHEAPER PRICE IS OUR GUARANTEE !

Product  Detail

Product Brief Introduction

Two phase three wire electronic energy meter is energy metering product developed and manufactured by our company.

It can be applied to the two phase AC active energy metering of rated voltage of 127V and 60Hz frequency . 

Basic function

a.The meter an measure the energy consumption normally at current reverse situation and the energy will be added automatically to forward energy consumption.

b.With Phase absence indicate function:When any phase is absence,the corresponding indicated LED will turn on.

c.The meter can work normally under condition of single phase power supply.

Pulse LED indicates working of meter,Pulse output with optical coupling is olation.

d.Type of cases protective-class II

Technical data

Reference voltage:  127V*2/220V

Reference current: 5A,10A,20A

Reference frequency: 50/60Hz

accuracy of Measurement  : CLASS 1.0

Intrinsic error: meets the requirement of GB/T17215.321-2008

Starting current: ≤0.004Ib

Shunt running: When the energy meter is applied to 115% of the reference voltage and the current line has no current,

                              energy meter should not output more than 1 pulse within 10 times of 1 pulse generated at the starting current.

Power consumption: Voltage line power consumption(non communication state) :≤ 1W, 10VA

Voltage line power consumption(communication state) :≤ 1.5W, 12VA

current line power consumption:≤0.5VA(under the current state of Ib)

Working temperature range: -25℃~60℃

Limit working temperature range: -40℃~70℃

Limit temperature range of storage and transportation: -40℃~70℃

Relative humidity: Annually average <75% 30 days (These days is in Natural mode distribution in a year) 95% in other days

Accidental appear : 85%

Atmospheric pressure: 63.0kPa~106.0kPa(altitude 4000m and below)

Normal working voltage range: 0.9Un~1.10Un

Extended working voltage range: 0.8Un~1.15Un

Limit working voltage range: 0.07Un~1.20Un

After the blackout data save time≥ 5years

Data save time after power failure

Product service life: more 10 years

Dimensions: 160mm(length) ×135mm(width) ×58.5mm(thick)

Weight:  approximately 0.8 kg

Electric energy pulse length: 80ms±16ms

Infrared communication rate: 1200bps

Communication protocol: 62056-2 direct local data exchange

Main function introduce

1. Metering function

1.1 It has forward active total energy metering function

1.2 The meter will back-up the record of forward active total energy every one hour.

1.3 The meter can record the use of electricity

2. Event record

2.1 Record the maximum demand for the month, occurrence time and the maximum demand for the last 4 months and the occurrence time.

2.2 Record the events of power-fail, lose of L1 and L2 phase, the event times and the time of duration and the starting and ending time of the 8 recent event.

2.3 Record the total times of the events of power off, clearance requirement, calibration time, battery loss and memory error and the 8 recent occurrence time.

3. Communication function

3.1 It adopt 62056-21 direct local data exchange protocol, and has far-infrared communication function.

4.Timing function

It has functions of calendar, timer, automatic conversion of a leap year.

The output frequency of internal clock terminal is 1 Hz. In the temperature range of -25~+60℃  , the clock accuracy is ≤±1.5s/d; Under the reference temperature of 23℃   , the clock accuracy is ≤±1s/d.

5. LED instructions

The electric energy meter has a LED pulse which is proportional to the electric energy of the measurement, instructions of loss of L1 phase and L2 phase and reversal of current.

The property of light testing output device meets the requirement of GB/T17215.211—2006. The property of electric testing output device meets the requirement of GB/T15284—2002.

6. LCD display item

Outline dimension

                                                                                                                                                                                                                                                                               P+,P-:Pulse correcting interface     

The meter is highly precise, highly sensitive. Highly reliable wide load rang, low power loss, the power in double directions.

Both positive and negative work can be measured in accumulated same direction.

So it can prevent any power steeling, such as reverse steeling. live-earth wire steeling, short circuit and so on.