Rotary grille decontamination machine is a continuous automatic can intercept and remove various shapes of sundry in fluid of water treatment equipment, can be widely used in urban sewage treatment. Water industry, inlet of power plant, at the same time can also be used as a textile, food processing, paper making, leather and other industries in the process of wastewater treatment of the front-end screening equipment, is at present our country one of the most advanced solid-liquid screening equipment, fill the domestic blank

    Working principle:  

YM type rotary grille decontamination machine is a kind of unique tine factory assembly into a set of rotary grate chain. Under the drive of the motor reducer, tine chain under flow direction turning motion.

     Rake tooth chain operation to the upper part of the equipment, because of the Geneva wheel and rail bending direction, make each group of self-cleaning relative movement between the tine, the vast majority of solid material by gravity. Others rely on sweeper inverse kinematics to stick to the tine on the clean debris.

     According to the flow direction similar rake tooth chain with grille, tine on the rake tooth chain shaft assembly clearance can undertake choosing according to the conditions of use. When the tine of fluid solid suspension can ensure smooth flow of water through the after separation. The whole working process is continuous, also can be intermittent.

features as follows : 

    The equipment is one of the biggest advantages is the high degree of automation, high separation efficiency, low power consumption, no noise, corrosion resistant performance is good, in the case of unattended can guarantee the stability of continuous work, set up a overload safety device, the device fails, will automatically stop, can avoid the equipment overload. This equipment can be adjusted according to the needs of user equipment operation interval, achieve periodically; Can be based on grid level difference before and after automatic control; And, with manual control functions to facilitate maintenance. The user can choose according to the needs of different jobs.

  Due to the equipment structure design is reasonable, the equipment work, own strong self-purification ability, not the clogging phenomena, so the daily maintenance work very little.

Technical parameters and type selection

1, equipment, and tine specifications

   Equipment specification according to the size of machine wide HF300-3600. Machine more than 1800 mm wide, and online. Tine grid gap is divided into 1 mm, 3 mm, 5 mm, 10, 20, 30, 40 mm mm mm mm, 50 mm and so on each kind of specification, type selection by water, hoisting height, amount of solid-liquid separation and separation material shape, particle size to choose, at the same time equipped with different material.

2, Length of the equipment specifications

   Equipment standard groove deep 1535 mm, can be used according to user needs and the actual situation any longer. Special specifications shall be separately designed.