Product Details

Specifications

High-quality adss tension clamp
10 Years Professional Experiences
*ISO9001:2008
*Direct Manufacturer
*Fastest Delivery

Preformed dead end grip for optical fiber

High-quality tension cable Specification

(1) Tension Sets are designed to connect ADSS cables and poles. Aluminum clad Steel rods can provide protection and cushioning to the ADSS cables.

(2) extend life.

(3) Protect the cable well.

(4) Fast delivery time

(5) ISO 9001

High-quality tension cable Application Guide

1.It is designed to connect continue pole(tower) and Terminal pole(tower), tensile pole or line angles above 25^.Pole(tower). The special specification: one unit per Terminal pole(tower), two units per tensile pole(tower), two units per continue pole (tower).

(2)

1.You can Select the Specification Model corresponding to the appropriate cable diameter range, maximum allowable tension(MAT) or Span Length from Data Sheet.

Normal Components:

Brief View

Tension Clamps are designed to connect ADSS cables and poles. Aluminum clad Steel rods can provide protection and cushioning to the ADSS cables. The special design of helical protection rods makes ensure that Tension Sets can’t cause undue stress to the ADSS cables. So that the normal lifetime of cables system is ensured.

OPGW Tension Clamp Application

OPGW Tension Clamp Specification
Product type	suitable cable diameter (mm)	Inner reinforcing armour rods		Outer armour rods		color
Product type	suitable cable diameter (mm)	length (mm)	rods No.	length (mm)	rods No.	color
ONF 1000 xxx	9.0 - 10.0	1400	13	900	6	red
ONF 1110 xxx	10.1 - 11.1	1500	14	1000	6	orange
ONF 1220 xxx	11.2 - 12.2	1600	15	1100	6	yellow
ONF 1330 xxx	12.3 - 13.3	1700	16	1200	6	green
ONF 1440 xxx	13.4 - 14.4	1800	18	1300	6	cyan
ONF 1550 xxx	14.5 - 15.5	1900	19	1400	7	blue
ONF 1660 xxx	15.6 - 16.6	2000	20	1500	7	purple
ONF 1770 xxx	16.7 - 17.7	2100	21	1600	8	black
ONF 1880 xxx	17.8 - 18.8	2200	22	1700	8

Ancillary Connection Hardware

U-Anchor shackle type	Paraller plate type	Clevis Thimble type	Tensile Strength(KN)	Material
U-7	YL 210 070	NHG-070	70	Hot-dig galvanized steel
U-10	YL 210 100	NHG-100	100	Hot-dig galvanized steel
U-12	YL 210 120	NHG-120	120	Hot-dig galvanized steel
U-16	YL 210 160	NHG-160	160	Hot-dig galvanized steel

OPGW Tension Clamp Packing Details
Packing		Packed by wooden case. At the bottom of the case is moistureproof linoleum, then covered with waterproof membrane.
Normal tension clamp factory quantity		Standard quantity is 200 or 300 sets with a tolerance of 5% or other required
Tension Clamp Weight		Approx. 5kg per Set