Yimei DAF Plant for TSS BOD and FOG remove
Yimei DAF Plant for TSS BOD and FOG remove
Yimei DAF Plant for TSS BOD and FOG remove
Yimei DAF Plant for TSS BOD and FOG remove
Yimei DAF Plant for TSS BOD and FOG remove
Yimei DAF Plant for TSS BOD and FOG remove

Yimei DAF Plant for TSS BOD and FOG remove

USD $3,600 - $20,000 /Set

Min.Order:1 Set

Supply Ability:
200 Set / Sets per Month
Port:
Qingdao
Payment Terms:
T/T Credit Card

Quick Details View All >

Place of Origin:
Shandong, China
Brand Name:
YIMEI
Model Number:
YMRF-5

Qingdao Yimei Environment Project Co., Ltd.

Business Type: Manufacturer,Trading Company
Qingdao Shandong China
Main Products: Waste Water Treatment Plant ,MBR Sewage Treatment Plant ,Dissoved Air Flotation Machine ,Jet Flow Air Flotation Machine ,Submersible Mixer

Product Details

  Yimei DAF Plant for TSS BOD and FOG remove

 

 

 Yimei DAF Plant for TSS BOD and FOG remove

 

Product Discription

  Daf is used for removing suspended matter that does not float or sink in water and waste water. Separation of suspended solids is done by fine gas bubbles which become attached to particulate matter, and float them to the surface where it is removed by skimming. Gas bubbles are introduced by reducing the pressure of the wastewater causing dissolved gases to be released. Commonly used to separate grease , oil and fat matters from industrial wastes.
Designs include Rectangular , circular , cross flow and inclined parallel plate systems

 

                   Yimei DAF Plant for TSS BOD and FOG remove 

  

Work Principle

By the compressor,the air will be sent into air tank.Then it will be taken in air dissolved tank by jet flow device.In the dissolved tank,the air will be liquefied under 0.35Mpa pressure.Then the liquefied are will be sent to air flotation tank.When released suddenly, the air will be dissolved out and turn into a microbubble group.The group will meet the flocculating suspension in the sewage which is sent by pump and already medicated.It will be absorded in the flocculated suspension while slowly rising up.Along with reduction of the suspension's density,the suspension will go up to the water surface.Finally,the SS and CODcr will be removed. 

Yimei DAF Plant for TSS BOD and FOG remove

 

 

 

Yimei DAF Plant for TSS BOD and FOG remove  

 

Product Overviews

Yimei DAF Plant for TSS BOD and FOG remove 

 

Advantages
  • Dissolved air pump edge bibulous the edge is inspiratory, pump pressurized mix within, gas to liquid efficient dissolving, small bubbles than 30 um.
  • Low voltage operation, the dissolved gas efficiency is as high as 99%, release rate as high as 99%.
  • Tiny bubbles and suspended particles of efficient adsorption, improve the SS remove effect.
  • Dissolved gas water dissolving efficiency 80-100%, than traditional dissolved gas floating high efficiency three times.
  • Pressure-capacity curve smooth, easy to achieve automatic control, easy to operate, easy maintenance, low noise.
Packaging&Shipping

Yimei DAF Plant for TSS BOD and FOG remove 

 

Company Information

Qingdao Yimei Environment Project Ltd. is found in 1988.We are located in the largest port city-Qingdao China. Our factary take up 36,000 square metres and there are more than 130 kinds machine for manufacturing. As a member of Shandong Province Environmental Protection Industrial Association, we have 360 staff and  72 experienced engineers.

Our main product is the equipment for Environment Protection and Waste Water Treatment.And the product is popular all over the world,such as Africa, North America,Domestic Market,Eastern Asia,Mid East.

 

Yimei DAF Plant for TSS BOD and FOG remove 

FAQ

[Q]How to buy your idea products?

[A]You can provide us your water sources, water quality, flow rate and ground area (contact us for more details). 

[Q]What is your payment terms?  

[A]TT and L/C are acceptable and TT will be more appreciated.30% deposit in advance and balance before loading.

[Q]What is the delivery time?

 [A] It depends on order quantities. Generally speaking, the delivery time will be within 4 to 6 weeks.

[Q]How to pack the products?

 [A]We use standard package. If you have special package requirements, we will pack as required, but the fees will be paid by customers.

[Q]How to keep your equipments from corrosion? 

[A]We use the world-famous paint, like SigmaCoatings,PainBow,etc. What's more, we paint strictly according to the standard process.

[Q]How do you manufacture your equipment ?

[A]Our  machining technology  includes laser/plasma cutting, automatic welding,CNC cutting and bending.

[Q] How to install after the equipments arriving destination? 

[A] We will provide detailed illustrations to you. If it is necessary, we will send technicians to help you. 

 

 

 

 

If you are interested in our product and company,please do not hesitate to contact us.

 

 

 

Contact Supplier

Ms. lin chen manager Chat Now
Telephone
86-532-88180456
Mobile
0086-13853232196
Fax
86-532-88180610
Address
Chang an Road, Jiaonan Qingdao Qingdao,Shandong

You May Like

New Products

Recommended Products

View More View Less

Find Similar Products By Category

Environment > Water Treatment
Categories
Hi~