Dissolved Air FlotationIndustrial For Solid and Liquid Separation Wastewater Treatment System
USD $7,600 - $52,000 /Set
Min.Order:1 Set
Qingdao Yimei Environment Project Co., Ltd.
High Quality Dissolved Air Flotation Machine For Oily Water Oil Removal and TSS Remove
industrial wastewater pretreatment solid-liquid separation DAF machine
DAF dissolved air floatation machine for paper mill paper and pulp wastewater treatment
Factory direct Dissolved air floatation machine for slaughter wastewater
Dissolved air flotation machine (DAF) is manufactured by our factory and mainly used for solid-liquid separation and liquid-liquid separation.
Work Principle:
The air will be send by air compressor into air tank, then take in air dissolved tank by jet flow device, the air will be force to dissolve into water under 0.35Mpa pressure and forming dissolved air water, then send to air flotation tank. Under the circumstance of sudden release, the air dissolved in water will be dissolve out and form vast microbubble group, which will be fully contact the flocculating suspended matter in sewage, the suspended matter was sent by pump and flocculation after adding medicine, the ascending microbubble group will adsorb in the flocculated suspended matter, made its density reduce and floated to water surface, thus reach the purpose of removing SS and CODcr etc.
Characteristics
1)Dissolved air pump edge bibulous the edge is inspiratory, pump pressurized mix within, gas to liquid efficient dissolving, small bubbles than 30 um.
2) Low voltage operation, the dissolved gas efficiency is as high as 99%, release rate as high as 99%.
3) Tiny bubbles and suspended particles of efficient adsorption, improve the SS remove effect.
4)Dissolved gas water dissolving efficiency 80-100%, than traditional dissolved gas floating high efficiency three times.
5) Pressure-capacity curve smooth, easy to achieve automatic control, easy to operate, easy maintenance, low noise.
Technical Data:
Model | Disposal capacity (m3/h) | Equipment size (m) | dissolved air vessel size (mm) | With motor power | Equipment total weight | ||
Length | Width | Height | (Kw) | (Kg) | |||
YMRF-1 | 1 | 1.0 | 0.8 | 1.0 | Φ200 h800 | 1.5 | 300 |
YMRF-3 | 3 | 1.7 | 1.2 | 2.0 | Φ300 h1000 | 2.2 | 800 |
YMRF-5 | 5 | 2.5 | 1.5 | 2.0 | Φ300 h1500 | 2.2 | 1200 |
YMRF-10 | 10 | 4.6 | 1.7 | 2.0 | Φ400 h3000 | 4.0 | 2000 |
YMRF-20 | 20 | 6.0 | 2.0 | 2.0 | Φ400 h3000 | 4.0 | 3200 |
YMRF-30 | 30 | 7.2 | 2.0 | 2.1 | Φ500 h3000 | 5.5 | 4500 |
YMRF-40 | 40 | 8.3 | 2.8 | 2.2 | Φ500 h3000 | 5.5 | 6000 |
YMRF-50 | 50 | 9.3 | 3.2 | 2.2 | Φ600 h3000 | 7.5 | 7100 |
YMRF-60 | 60 | 10.3 | 3.2 | 2.2 | Φ600 h3000 | 7.5 | 8500 |
YMRF-80 | 80 | 11.2 | 3.5 | 2.5 | Φ800 h3000 | 11 | 9000 |
YMRF-100 | 100 | 12.5 | 3.9 | 2.5 | Φ800 h3000 | 15 | 11000 |
Qingdao Yimei Environment Project Ltd. is found in 1988.We are located in the largest port city-Qingdao China. Our factary take up 36,000 square metres and there are more than 130 kinds machine for manufacturing. As a member of Shandong Province Environmental Protection Industrial Association, we have 360 staff and 72 experienced engineers.
Our main product is the equipment for Environment Protection and Waste Water Treatment.And the product is popular all over the world,such as Africa, North America,Domestic Market,Eastern Asia,Mid East.
[Q]How to buy your idea products?
[A]You can provide us your water sources, water quality, flow rate and ground area (contact us for more details).
[Q]What is your payment terms?
[A]TT and L/C are acceptable and TT will be more appreciated.30% deposit in advance and balance before loading.
[Q]What is the delivery time?
[A] It depends on order quantities. Generally speaking, the delivery time will be within 4 to 6 weeks.
[Q]How to pack the products?
[A]We use standard package. If you have special package requirements, we will pack as required, but the fees will be paid by customers.
[Q]How to keep your equipments from corrosion?
[A]We use the world-famous paint, like SigmaCoatings,PainBow,etc. What's more, we paint strictly according to the standard process.
[Q]How do you manufacture your equipment ?
[A]Our machining technology includes laser/plasma cutting, automatic welding,CNC cutting and bending.
[Q] How to install after the equipments arriving destination?
[A] We will provide detailed illustrations to you. If it is necessary, we will send technicians to help you.