Product Details

Product Description

condenser for cold room
SERIES	EATB120
DESIGN PRESSURE(Mpa)	3.0 OR 4.5
LOWEST WORKING TEMPERATURE	—180
HIGHTEST WORKING TEMPERATURE	200
SINGLE PLATE EXCHANGED AREA	0.12
LIQUID LOAD PER CHANNAL(L)	0.254
CROSS-SECTIONAL AREA PER CHANNAL	0.00052
PLATE MATERIAL	SS316L/304L
WELDING MATERIAL	99.9% COPPER
HIGHT(mm)	564
WIDTH(mm)	247
THICKNESS(mm)	2.×N(number of plates)+8
WEIGHT(Kg)	0.585×N(number of plates)+4.4

Applications:

1,Used in various fluid media:all type of refrigerants(R410a,R407c,R404,R134a,R22,R23,etc),oil,water,water and glycol mixtures.

2,Used in various equipment:hot pumps,industrial water cooling machines,plastic injecting machines,welding machines,oil pressure machines,compressors(circulation oil),air conditioners,refrigerators,air dryer,water cooler,drinking thoughts,constant temperture refrigerator,heat recollection and circulation,floor heating,indoors and outdoors heating devices

Features:

1. High-efficiency: The combination of fluid turbulence technical features than the traditional shell and tube heat exchanger 3-6 times more efficient heat transfer.

2. Small size, light weight: only equivalent to the shell and tube heat exchanger of 20-30%, greatly reducing the design of the installation space, so that the entire structure of the unit more compact, more reliable quality.

3.High-temperature, high pressure: the metal material determines its own with high-temperature (up to 400 ° C) and pressure (the pressure of work 30BAR, can be enhanced 45BAR).

4.Low-cost: heat exchanger than the average cost-saving materials, and to save installation space and reduce overall design costs.

5. Corrosion-resistant: good corrosion resistance.

6. To facilitate the installation of: fixed a variety of ways, easy to install.

7. Quality: the industry leader in advanced technology and years of practice experience in production, the cast of high-quality products.

condenser for cold room consist of stainless steel plate packs, which have embossed chevron patterns. The plates are turned 180 degrees to each other, causing the plate ridges to intersect and creating a lattice of intersecting channels. Fluids can flow in counter-current and co-current way. The entire construction is nondismountable and scaled together by means of brazing in a special vacuum furnace.

Major advantage over a conventional condenser for cold room in that the fluids are exposed to a much larger surface area because the fluids spread out over the plates. This facilitates the transfer of heat, and greatly increases the speed of the temperature change. condenser for cold room are now common and very small brazed versions are used in the hot-water sections of millions of combination boilers. The high heat transfer efficiency for such a small physical size has increased the domestic hot water (DHW) flowrate of combination boilers. The small condenser for cold room has made a great impact in domestic heating and hot-water

How condenser for cold room Works:

Heat transfer occurs when there is a difference in temperature between two mediums. Heat will travel from the hot source to the cold source. The rate at which the heat transfer occurs at is determined by many factors such as the heat conductivity of the two materials andthe difference in temperatures of the two mediums. Convectiuve heat transfer occurs when the materials are moving against each other

Corrosion protection for condenser for cold room stainless steel has a high resistance to most chemicals but is sensitive to chloride ion concentration so this must be limited to 280ppm or less(lower than 55 C),the copper used in the brazing process is mainly sensitive to strong acid and ammonia so the PH must be maintained between 6 to 8.in practical application.for example,hydrochloric acid should never be used to clean the condenser for cold room ;if condenser for cold room are applied in seimming pool heating,limite chloride ion concentration to 280ppm in the water;what's more,in chemical,pharmacy and other industries,solutions containing strong acid like hydrochloric acid and harshorn won't be proper fluid medium.

Applications for the condenser for cold room :

This is an extremely popular unit for wood burning furnaces, radiant floor systems, refrigerant systems, straight vegetable oil conversions, beer chilling, air conditioning system and solar water heating systems. It will work for any application in which the desired result is for two fluids (liquid or gas) to exchange heat.

Packaging & Shipping