Heat Exchanger Price
USD $15 - $20 /Piece
Min.Order:1 Piece
Jiangmen City East-Alliance Thermal Equipment Co., Ltd.
East-Alliance is a Chinese top brazed plate heat exchanger manufacturer. We have more than 8
years experience in design, R&D and manufacture of heat exchanger with top quality and services.
Our exchanger use for industrial application, refrigeration application, condenser, evaporator, waste
heat recovery, economizer, cascade, refrigeration; heating application, high temperature heating water, domestic water, industrial water steam and etc.
Alliance Small Heat Exchanger
The details of our product
Product Name: | high quality small coaxial heat exchanger |
Model: | EATB 12-10 |
Plate Number: | N(number of plates) |
Thickness A(mm): | 29.2 |
Weight (kg): | 0.89 |
Volume Q1Q2 Side / Q3Q4 Side(L): | 0.08/ 0.08 |
Heat Transfer Area Per Plate(m²): | 0.012 |
Heat Transfer Area (m²): | (N-2)X0.012 |
Monolithic channel cross section area:(m²): | 0.00025 |
Lowest Working Temperature: | -180℃ |
Highest Working Temperature: | 200℃ |
Slad Materials: | SS316L/304L |
Welding Material: | 99.9% Copper |
Capacity: | ~5Kw |
High (mm): | 190 |
Width (mm): | 76 |
Applications: | 1, Used in various fluid media:all type of refrigerants (R410a, R407c, R404, R134a, R22, R23 and etc), oil, water, water and glycol mixtures. 2, Used in various equipment:hot pumps, industrial water cooling machines, plastic injecting machines, welding machines, oil pressure machines, compressors (circulation oil), air conditioners, refrigerators, air dryer, water cooler, drinking thoughts, constant temperature refrigerator, heat recollection and circulation, floor heating, indoors and outdoors heating devices |
brazed plate heat exchanger consist of stainless steel plate packs, which have embossed
chevron patterns. The plates are turned 180 degrees to each other, causing the plate ridges to
intersect and creating a lattice of intersecting channels. Fluids can flow in counter-current and
co-current way. The entire construction is mountable and scaled together by means of brazing in a
special vacuum furnace.
Major advantage over a conventional brazed plate heat exchanger in that the fluids are exposed
to a much larger surface area because the fluids spread out over the plates. This facilitates the
transfer of heat, and greatly increases the speed of the temperature change. brazed plate heat
exchanger are now common and very small brazed versions are used in the hot-water sections of
millions of combination boilers. The high heat transfer efficiency for such a small physical size has increased the domestic hot water (DHW) flowrate of combination boilers. The small brazed plate heat exchanger has made a great impact in domestic heating and hot-water.
Our Product advantage:
1, Extremely compact size, easy to install. |
2, Low weight,only accounts for 20~30% of the shell and tube heat exchanger |
4,Low fouling factor,high level of turbulence reduces the fouling factor and thereby reduces the frequency of cleaning |
5,High heat transfer efficiency,less water consumtion |
High quality is our survival and products, low-cost is our source of the customers, and high-quality service is the guarantee of our development. We will take the free maintenance for at less 1
years:
1. Under the condition of normal use;
2. We confirmed that the cargo damage caused by our production. For the shipping fee during the
procedure of maintenance, we could communicate directly.
Any questions about our products, please no hesitate to contact us , sincere service for you, and
welcome to East-Alliance.
Q1. Where can I use EATB HE?
A1. EATB HE are suitable for almost any refrigerant-to-liquid or liquid–to-liquid application but without corrosive media, such as ammonia or seawater.
Q2. Can I turn the unit around?
A2. Yes, all the EATB HEs are possible for all applications.
Q3. Can I use a EATB HE in swimming pool application?
A3. Yes. It is important to add the chloride after EATB HE, to avoid the risk of an unbalanced lever of chloride in the water passing through EATB HE. Nevertheless a stronger chloride will react with the
copper, which is obviously not good for EATB HE unit.
Q4. Can I use a EATB HE in a steam application?
A4. Yes. We strongly recommend to respect the four aspects:
1; A free exit on the condense side avoids possible shocks
2; Steam inlet has to be at the “marked side” on the upper connection. The “marked side” has once
channel less and the steam will therefore be surrounded by the liquid side.
3; Avoid formation of steam bubbles by adjusting the pressure on the secondary side correctly.
4; Avoid temperature differences over 50℃ in the start up procedure. When EATB HE is in operation
the temperature difference can be increased.