Product Details

Product Description

[Main Product] 70/35 PVC/PE/XLPE Plastic Extrusion Lines

Product Range

Find More Wire Drawing Machines and Cable Making Equipment within Our Scope of Supply


Multiwire Drawing Line Series Cu: Inlet: 1.60~2.60mm Outlet: 0.15~1.35mm Multiwire Drawing Lines 16-wire 8-wire *4-wire	Rod Breakdown Line Series Cu: Inlet: 8.00mm Outlet: 1.20~3.50mm Copper Rod Breakdown Drawing Lines Al: Inlet: 9.50mm Outlet: 1.20~4.50mm Aluminum Rod Breakdown Drawing Lines Cu & Al: Inlet: 6.00~12.50mm Outlet: 1.00~4.50mm Individual Drive Rod Breakdown Drawing Lines	Intermediate Wire Drawing Line Series Cu: Inlet: 2.50~3.00mm Outlet: 0.40~1.60mm Copper Intermediate Wire Drawing Large-Medium Wire Drawing Al: Inlet: 2.60~4.00mm Otlet: 0.80~2.00mm *Aluminium Intermediate Wire Drawing Machine	Fine Wire Drawing Machine Series Cu: Inlet: 0.50~1.60mm Outlet: 0.08~0.68mm Copper Fine Wire Drawing Machines Fine Drawer With Annealer and Spooler Fine Drawer With Automatic Spoolers Al: Inlet: 0.50~2.30mm Outlet: 0.15~0.70mm Aluminum Fine Wire Drawing Machines	Wire Coating Line Series Electroplating Lines Sn-Tin Ag-Silver Ni-Nickle Zn-Zinc Annealing & Tinning Lines

Stranding & Bunching Series Twist Bunching Machines 500P, 630P, 800P 1000P, 1250P	Extrusion Line Series Extrusion Lines 70/35 Extrusion Line 90/50 Extrusion Line	Pay-Off Series Motorised Wire Pay-Off Stands	Take-Up Series Compact Spoolers Single Spoolers Dual Spoolers Basket Down Coilers	Auxiliaries Cold Welders Powder Filters Threading & Pointing Machine Coil Packing Machines Spools, Bobbins, Reels

Product Specs

Technical Data

70mm extruder

1) motor: 30kW AC motor;

2) gear box type: ZLYJ200-Ⅱ;

3) screw : 38CrMoAlA,φ70mm, L/D:25: 1;

4) barral: 38CrMoAlA;

5) rotation speed:10-110rmin;

6) output:140kg/h (open crosshead, PVC);

7) heater: voltage:220V,4 zones, casting aluminium heater, 4.5KW per zones, one zone for half.

8) Clamp type: three pieces;

9) cooling: 4 zones, 370w;

10) total power: 30+4*4.5+9*0.11+4*0.37=50.47kW;

11) outer size: (L) 2700 * (W) 1400 * (H) 2500;

spares: one set heater for clamp,3 set thermocouple.

35mm sub extruder

1)Type: vertical

2)Motor: AC 3.7 KW;

3)Screw: 38CrMoAlA,φ35mm,L/D=18: 1;

4)Barrel: 38CrMoAlA ;

5)rotation speed:6-60r/min;

6)heater: voltage:220V,three zones, casting aluminum, 1KW per zones

7)cooling:3 fans for barrel, 60W .

8)total power: 3.7+3*1+9*0.09+0.85+0.95+3*0.06=9.49kW;

Power Supply

3-phase voltage ~3×380VAC (±10%)
Single-phase voltage ~220VAC (±10%)
Frequency 50Hz (±2%)

Note: This is an important factor affecting price. If the power supply in your country or region is different from our system, please advise us in your inquiry.

Company Overview

A Brief Glance of Our Company

Find Us

Some Ways You Can Easily Find Us