1. Fine wire drawing machine with annealer

HT-15DT annealing machine is to use short-circuit contact annealing principle, annealing power is DC power, applied to the annealing soft production of copper line, annealing machine makes up of the conductive system, oxidative protection systems, cooling systems, drying systems, electrical systems and other components. The way of oxidative production steam adopts steam protection (the device comes with a steam generator); cooling lubrication using the dilute concentration of drawing cycle. Generally speaking , it needs setting up pools or an external heat exchanger to cool (external heat exchangers and cooling towers by the user-owned); drying system uses compressed air and mold to dry. The used cooling water and compressed should be prepared by the user. The SCR of annealing electrical control adopts strong fan to cool.

2. Main technical data:

Outlet diameter: Φ0.8-Φ1.6mm

Inlet diameter: Φ0.25-Φ0.6mm

Drawing line speed: 1200mpm/max

Main motor power: 15KW

Annealing power: 30KW

Take-up motor power: 5.5KW

Annealer method: DC three-section annealing

Suitable diameter of spool: Φ300mm

Revise system: PID synchronous control spooler

Capacity for wire receiving: 50kgs

Using voltage: 380 V

Brake way: Magnetic brake

Machine dimention: 2568L*1538W*2974H

Machine weight: 3000kgs