Auto Extrusion Blow Molding Machine(JN-2S12L/T)

•     Double station
•     The Max. product volume is 12 liters.

The Features

1.  The screw adopt high potency melt to make sure the material well mixed for different material such as PP, PE, PS, PAN, PA, PPE, PPO, ABS, POM, TRV.
2. Adopt frequency control of motor system to reduce the power of consumption.
3. Choose single and double station according to you output easily.
4. Adopt the horizontal movement frame to improve stability and speed.
5. The oil cylinder is in the center of the moldboard,uniform stress for quality products and increase life span.
6. Three guild rod controller the mold open and clamp, to enhance the steadily and high efficiency.
7. The extrusion frame use head device, to influence the melt material avoid joint with the mold.
8. The extrusion head use spreader or screw type to well mixed the thickness and easy to change the different color.
9. Adopt parison control when necessary for thickness.
10. The professional oil system to reduce the strike and noise.
11. Use auto circular cutting system and automatic conveyor belt for fully automatic produce when necessary.
12. According customer's request, labeling machine is assorted.

General Specifications(JN-2S12L)

   The JN-2S12L/T have two station, but the centre distance is the same with the single station machine(JN-S12L), so, the Production Possibilities of JN-S12L and JN-2S12L are the same, as in the below:  

Main Characteristic

1.  Two station, single layer, 90mm screw, 22kw screw motor power, PE / PP etc.

2.  Power supply: 380VAC, 50Hz  (depending on client's county ).

3.  Die Head for choosing(the picture is in the below):

     One die head (up to 12L): 12L   around 200 bottles per hour

     Two die head (up to 5L): 5L   around 500 bottles per hour

4. Center Distance:

    The detail you can see the production Possibilities in the above.

5.  Deflashing system: Neck/ handle/ bottom deflashing

 
6.  MOOG 100 Points Parison Programmer (Optional)

Component Parts( Type C Machine Component List )

1. 1. 1. PLC controller: Germany SIEMENS
      2. France Schneider low-voltage apparatus
      3. Domestic test components
      4. Siemens Beide electrical motor
      5. Taiwan Delta VFD-B frequency
      6. USA Vickers hydraulic valve
      7. Taiwan Airtac air valve(UAS numatic air valve)

      No 1 & No 5. Eelectrical control panel

            Brand: Schneider and OMRON

      No 2. Pneumatic System

            Brand: Schneider

      No 3. Oil Pump/Selector Valve

            Brand: Northman or Vickers

      No 4. Oil Pump/ Selector Valve

            Brand: VICKERS or YUKEN

      No 6.  Hydraulic System

            Brand: Taiwan Northman, Japan YUKEN, and America VICKERS

      No 7. Parison Controller

            Brand: MOOG(100 points)

      No 8. PLC

            Brand: SIemens