SANPU CE ROHS Metal shell 35w 24v waterproof dc switching power supply
USD $1 - $16 /Piece
Min.Order:1 Piece
Shenzhen Sanpu Intelligent Technology Co., Ltd.
SANPU CE ROHS Metal shell 35w 24v led waterproof switch mode power supply
SANPU CE ROHS Metal shell 35w 24v ac dc switching power supply
SANPU CE ROHS Metal shell 35w 24v ac dc switch mode power supply
SANPU CE ROHS Metal shell 35w 24v led waterproof switching power supply
SANPU CE ROHS Metal shell 35w 24v ac dc led switching power supply
SANPU CE ROHS Metal shell 35w 24v ac dc Waterproof power supplies
Features:
1. Metal shell 35w 24v waterproof dc switching power supply.
2. The product consists of indoor type and outdoor type.
3. Convenient wiring.
4. Abnormality protection function : short circuit ,over load ,over voltage,over temp .
5. Various types for your choice:Constant Voltage Power supply and Constant Current Power supply.
6. Quality assurance: 2 years warranty.
7 High efficiency .
8.International AC input .
9.Built-in EMI fiter .
10.100% full load burn-in test .
LPS The metal shell waterproof LPS35-W1V | ||||
MODEL | 12V 35W | 15V 35W | 24V 35W | |
OUTPUT | DC VOLTAGE | 12V | 15V | 24V |
RATED CURRENT | 2.9A | 2.3A | 1.45A | |
CURRENT RANGE | 0~2.9A | 0~2.3A | 0~1.45A | |
RATED POWER | 35W | 35W | 35W | |
RIPPLE$NOISE(max.)NOTE2 | 100mV | 100mV | 150mV | |
VOLTAGE TOLERANCENOTE3 | ±1% | ±1% | ±1% | |
SETUP.RISE TIME | 200ms 100ms | |||
HOLD UP TIME(Typ.) | 30ms | |||
INPUT | VOLTAGE RANGE | 85-264VAC | ||
FREQUENCY RANGE | 47~63HZ | |||
POWER FACTOR(Typ.) | PF>0.6/220VAC | |||
EFFICIENCY(Typ.) | 85% | 85% | 88% | |
AC CURRENT(Typ.) | 0.85A/110V/0.38A/230V | |||
INRUSH CURRENT(Typ.) | COLD-START CURRENT30A/230VAC | |||
PROTECTION | Short circuit | Protection Type:recovers automatically after fault condition is removed | ||
Overlaod | 102%~107% hiccup mode,auto-recovery | |||
Over voltage | ||||
Over temperature | ≥105%°C cut off the output, auto-recovery | |||
ENVIRONMENT | WORKING TEMP. | -20°C~+60°C | ||
WORKING HUMIDITY | 20%~90%RH | |||
STORAGE TEMP.HUMIDITY | –40°C~85°C/10%~95%RH | |||
SAFETY&EMC | SAEFTY STANDARDS | CE ROHS IP67 | ||
WITHSAND VOLTAGE | I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC | |||
EMC Test Standards | EN55015:2006;EN61547:1995+A1:2000;EN61000-3-2:2006; | |||
EN61000-3-3:1995+A2:2005;EN61347-1:2001;EN61347-2-13:2006 | ||||
NOTE | 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation |
Introduction
Certificates
Packing
Logistics&Payment