SANPU CE ROHS Metal shell 35w 24v ac dc led switching power supply
USD $1 - $16 /Piece
Min.Order:1 Piece
Shenzhen Sanpu Intelligent Technology Co., Ltd.
SANPU CE ROHS Metal shell 35w 24v ac dc Waterproof power supplies
SANPU CE ROHS LPSL 12w 24v metal shell waterproof constant current power supply
SANPU CE ROHS Metal shell 24W 24V switch mode waterproof led power supply
SANPU 2013 hot selling Shenzhen CE ROHS Metal shell 24W led driver led 24v dc power supply
SANPU 2013 hot selling CE ROHS IP67 35w 24v led power driver ac dc waterproof power supply
2013 new arrival CE ROHS LPSL 12w IP67 waterproof meanwell led driver 24v dc power supply
Features:
1. Metal shell 35w 24v ac dc led switching power supply.
2. The product consists of indoor type and outdoor type.
3. Convenient wiring.
4. Abnormality protection function : short circuit ,over load ,over voltage,over temp .
5. Various types for your choice:Constant Voltage Power supply and Constant Current Power supply.
6. Quality assurance: 2 years warranty.
7 High efficiency .
8.International AC input .
9.Built-in EMI fiter .
10.100% full load burn-in test .
LPS The metal shell waterproof LPS35-W1V | ||||
MODEL | 12V 35W | 15V 35W | 24V 35W | |
OUTPUT | DC VOLTAGE | 12V | 15V | 24V |
RATED CURRENT | 2.9A | 2.3A | 1.45A | |
CURRENT RANGE | 0~2.9A | 0~2.3A | 0~1.45A | |
RATED POWER | 35W | 35W | 35W | |
RIPPLE$NOISE(max.)NOTE2 | 100mV | 100mV | 150mV | |
VOLTAGE TOLERANCENOTE3 | ±1% | ±1% | ±1% | |
SETUP.RISE TIME | 200ms 100ms | |||
HOLD UP TIME(Typ.) | 30ms | |||
INPUT | VOLTAGE RANGE | 85-264VAC | ||
FREQUENCY RANGE | 47~63HZ | |||
POWER FACTOR(Typ.) | PF>0.6/220VAC | |||
EFFICIENCY(Typ.) | 85% | 85% | 88% | |
AC CURRENT(Typ.) | 0.85A/110V/0.38A/230V | |||
INRUSH CURRENT(Typ.) | COLD-START CURRENT30A/230VAC | |||
PROTECTION | Short circuit | Protection Type:recovers automatically after fault condition is removed | ||
Overlaod | 102%~107% hiccup mode,auto-recovery | |||
Over voltage | ||||
Over temperature | ≥105%°C cut off the output, auto-recovery | |||
ENVIRONMENT | WORKING TEMP. | -20°C~+60°C | ||
WORKING HUMIDITY | 20%~90%RH | |||
STORAGE TEMP.HUMIDITY | –40°C~85°C/10%~95%RH | |||
SAFETY&EMC | SAEFTY STANDARDS | CE ROHS IP67 | ||
WITHSAND VOLTAGE | I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC | |||
EMC Test Standards | EN55015:2006;EN61547:1995+A1:2000;EN61000-3-2:2006; | |||
EN61000-3-3:1995+A2:2005;EN61347-1:2001;EN61347-2-13:2006 | ||||
NOTE | 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation |
Introduction
Certificates
Packing
Logistics&Payment