I. What is the section of the palm oil press workshop?                                                        

1.Raw materials receiving Station of Palm FFB oil process equipment

Fresh palm fruit bunch will be loaded on a slope. Under the slope, there are some cages to receive the palm fruits.  

2.Sterilizing station of Palm FFB oil process equipment

fresh palm fruits bunch are airtight sterilized in sterilizer. The purpose to prevent enzymes broken down, avoiding FFA content in oil further increase.  

3.Threshing Sation of Palm FFB oil process equipment

The purpose of threshing is the oil palm fruits be separated from the fruit bunch through strong vibration, 

4.Pressing Statioin of Palm FFB oil process equipment

Oil palm fruit pressed is divided into two parts: oil, water, solid impurities mixture and the press cake (fiber and nuclear). Oil, water, solid impurities mixture by the crude oil gutter inflow to oil purificationsection; press cake by breaking screw conveyor into the fiber- recovery section.

5. Clarification Station of Palm FFB oil process equipment

 The oil and the sludge taken out separately (by 90% pure oil) is taken out of the oil containing 45% -55% of the water, sludge and other things.

 Purification: oil purification process - improving pure

Drying: Continuous Vaccum Drier with the oil out of the water, the water can be reduced to 0.1%.

6. Kernel recovery station of  Palm FFB oil process equipment

 Depericarper (splitter): Through floating dry processing the fruit core and fibers separated.

Fiber and other lighter stuff was blown appearance

Crushing (Crusher): stone cracked open grain separation kernel and shell. In Hydrocyclone, 

 the use of kernel and core-shell particle proportion to their separation.

7. Power House (power house) of Palm FFB oil process equipment

the use of diesel powered generators and turbine generators, 

more environmentally friendly energy production and electricity consumption to power.

8.Water Treatment of Palm FFB oil process equipment

After settling, filtration, dosing and other processes to ensure that the water 

quality, but also to ensure oil quality.

II. What is the section of palm oil refinery & fractionation workshops?                                                 

1.Degumming of Palm FFB oil process equipment

This is the most important section of hydrate de-gumming, manage the adding water (there is a little P-acid in the water) amount, temperature and add water speed, usually water adding amount is about 3 times of phospholipid content, that is 3-10% oil weight, water temp needs to be higher than oil temp.  

2.Deacidification of Palm FFB oil process equipment

This part adopt alkali refining method, that is use alkalis like (NaOH) to neutral the free fatty acid in oil, during this process it will produce soapstock , then separated from the oil by setting several hours. NAOH solution, not only neutral free fatty acid, also can act with other matters like protein, mucus, phospholipid, pigment. After settling, release the soapstock from the tank bottom. Adding hot water to rinse, remove off the leftover lye , soap and some unhydrated phospholipid in the oil. Finally pumping out soapstock from the tank bottom  

3.Decolorization of Palm FFB oil process equipment

 In normal situation , there is pigment in the crude oil , we need to using the active clay to absorb the pigment away , after 20 mins , we use the vibrating filter to filter the waste clay away . If you want to get light color oil , you need to add more active clay . That is mean , the customer can accord to his requirement to control the oil color. This process is carried out under the vacuum condition.

4.Fractionation of Palm FFB oil process equipment

Palm oil fractionation and production technology developed by our company is one advanced technology, full computer  automatic cooperation, lower investment cost, high liquid oil yield, high solid fat purity and high benefit.

III. The photos of Palm FFB oil process equipment                                                                                                                              

Pre-sales Service

1.Offering comprehensive technical and business consultation services;
2.Proposing the most suitable scheme and equipment for our clients;
3.Designing and fabricating targeted products according to the special requirements of clients;

Service on Sale

1.Providing initiative and enthusiastic service;
2.Introducing & Demonstrating products and its application to clients;
3.Helping clients to choose equipments.

After-sales Service

1.Highly inspecting equipments in every working procedure, quality comes first;
2.Fast & Safe Delivery;
3. Assisting our clients for foundation construction of equipments;
4.Dispatching engineers to install and debug equipments;

Main Business Field:

 If you have interest in our Palm FFB oil process equipment,please kindly send us your inquiry details in the Below ,  Click "Send" Now!