pp monofilament form

FUNCTION:

Resist to shrink & crack           

Increase seepage resistance

Increase friction resistance         

Increase freezing & thawing resistance    

Improve tendons protection        

Replace steel net (using in plastering)

Prevent mortar split and crackle expansion 

Increase impact resistance and peeling resistance

FEATURE:

1. Easy to be dispersed in mortar or concrete and no agglomeration, it can guarantee the property of crack resistance effectively
2. Easy to be used: No need to change the proportion of mortar, just put the fibers into the mortar mixture and stir for a moment after adding water.
3. It with fine economic property: The equivalent diameter of PP monofilament is only φ 0.03mm, so the ratio of diameter and surface area is high and on the basis of crack resistance, it can reduce the amount (to about 0.6kg/m 3 ).
4. Easy to plaster: As the great number of thin fibers spread into mortar evenly, the plastering is much easily and this can improve the binding strength between surface and base.
5. It with stable chemical property, strong acid &alkali resistance, and can be used in any engineering projects.

APPLYING INSTRUCTION:

A). Compound Amount. To resist the common cracks on surfaces, 0.6kg/m3 fibers to cement paint is enough, and for reinforced application 0.9-1kg/m3 is enough.

B). Stirring requirement. The proportion of cement, sand and aggregate is no need to be changed. Put cement, aggregate, additive and fiber together, then stir after adding enough water (Do not stir without water!) and time for stirring can be prolonged for 2~3 minutes in order to make the compound mix completely.

SUITABLE PROJECT:

A). Be suitable for the water–proof layer, floor, inner &outer wall of industrial and civil construction.

B). Increase cracking resistance on the surface of industrial workshop, warehouse and parking lot.

C). Increase cracking & seepage resistance of the ground in natatorium, swimming pool, pond and ditch.

D). Be suitable for any mortar projects and fine aggregate concrete projects.

SPECIFICATION:

Raw Material---------------Polypropylene

Crack Elongation----------15-20%

Fiber Type------------------monofilament     

Fiber Dia.--------------------0.03+/-0.005mm

Melting Point(°C)----------160—170        

Density(g/cm3)--------------0.91

Acid &Alkali Resistance---Strong      

Tensile Strength (MPa)----500Mpa min.

Length: 6mm/12mm/19mm etc..

Packing: 0.6kgs or 0.9kgs per bag, 18kgs per carton.

Quantity: 400CTNS/20`FCL without pallet

828CTNS/40`FCL without pallet

980CTNS/40`HQ without pallet.