concrete additives, PP Fiber
USD $1.8 - $2.6 /Kilogram
Min.Order:500 Kilograms
concrete additives
Polypropylene fibre monofilament
Resist to shrink & crack
Increase seepage resistance
Increase friction resistance
Increase freezing & thawing resistance
Improve tendons protection
Replace steel net (using in plastering)
Prevent mortar split and crackle expansion
Increase impact resistance and peeling resistance
FEATURE:
A). Compound Amount. To resist the common cracks on surfaces, 0.6kg/m3 fibers to cement paint is enough, and for reinforced application 0.9-1kg/m3 is enough.
B). Stirring requirement. The proportion of cement, sand and aggregate is no need to be changed. Put cement, aggregate, additive and fiber together, then stir after adding enough water (Do not stir without water!) and time for stirring can be prolonged for 2~3 minutes in order to make the compound mix completely
A). Be suitable for the water–proof layer, floor, inner &outer wall of industrial and civil construction.
B). Increase cracking resistance on the surface of industrial workshop, warehouse and parking lot.
C). Increase cracking & seepage resistance of the ground in natatorium, swimming pool, pond and ditch.
D). Be suitable for any mortar projects and fine aggregate concrete projects.
Raw Material | Polypropylene |
Fiber Type | monofilament |
Crack Elongation | 15-20% |
Fiber Dia. | 20um, 30um |
Melting Point(°C) | 160—170 |
Density(g/cm3) | 0.91 |
Tensile Strength (MPa) | 450 min. |
Length | 6mm/12mm/18mm... |
Acid &Alkali Resistance | Strong |
0.6kgs or 0.9kgs per bag, 18kgs per carton.
Quantity: 400CTNS/20`FCL without pallet
828CTNS/40`FCL without pallet
980CTNS/40`HQ without pallet