Specifications

The characteristic of UHMW PE floating Pipe
1.Anti-abrasion
2.Anti corrosion
3.Self Lubrication
4.Non-scaling

Floating Discharge Pipe:

Company: Shandong Buoy&Pipe Industry Co., Ltd.

Business type: Manufacturer

Shandong Buoy & Pipe Industry Co., Ltd. is a technology leader specializing in research and

manufacturing of UHMWPE (ultra high molecular weight polythene) products--UHMWPE pipes, UHMWPE Navigation Buoys and UHMWPE Light Houses.

What is Ultra High Molecular Weight Polyethylene?

Ultra-high molecular weight polyethylene (UHMWPE) is a new kind of engineering thermoplastics with more than 3 million viscosity-average molecular weight. Ultra-high molecular weight polyethylene pipe has superior performance over conventional HDPE pipe such as very high wear resistance, impact resistance, excellent resistance to internal pressure strength, resistance to environmental stress cracking, intrinsically self-lubricating, anti-adhesion, low temperature resistance and excellent chemical resistance.

UHMWPE Pipes Advantages:

Longer Life

With a wear resistance 4 to 7 greater than Q235 Steel or 10 times that of HDPE (PE100) pipes under the same operating conditions, UHMWPE Pipe will give you far superior life under most operating conditions.

Non-Scaling

Because of its very smooth surface and self-lubricating properties, UHMWPE Pipe has far superior anti-scaling properties to any other pipeline on the market today. A non-stick factor that leads to its strength in the marine industry, preventing barnacle formation.

Lower Maintenance Costs, Less Maintenance Time, Less Downtime, Less Loss of Production

The far superior collaboration of wear resistance and weight reduction (0.93 SG) means the time between pipe replacements and/or rotations can be increased whilst simultaneously reducing installation management constraints of lifting gear and excavation requirements.

Reduced Pumping Costs

Along with the benefits mentioned above, UHMWPE Pipes also offer significant cost savings through increased pumping efficiency. With a surface roughness of 0.00022mm UHMWPE Pipe is extremely smooth and has resultant properties superior to PTFE (Teflon). Quantifying by example UHMWPE has a friction coefficient of 0.05, compared to 0.28 for HDPE or 0.58 for Steel (ISO 8295).

This means less friction, less pressure loss and greatly reduced energy inputs to deliver the same result.

Chemical and Corrosion Resistance

With chemical resistance second only to PTFE (Teflon), UHMWPE pipe will offer superior life to other pipeline products in acidic or corrosive applications under 85 degrees C.

Key Applications:

UHMWPE pipe for dredging
Slurry pipe
Tailings pipe
Coal mine pipe
Wear resistance pipe
Mud & sand dredging pipe
Pipe for municipal sewage sludge dredging

Performance comparison of UHMW-PE with other materials:

Item	Experimental methods	Units	UHMWPE	PA66	PVC	PE	Steel Pipe
Average molecular weight	GB1841		1.5×106			5×105
Density	GB1033	G/Cm3	0.935	1.13-1.15	1.4	0.945	7.8
Water absorption	ASTMD-570	%	0.01	3.8	0.07-0.4	0.01
Melting Point	ISO11357.3		136	255	160	129
Heat distortion temperature0.46MPa	GB1634		85	182-224	54-73	71
Linear expansion coefficient	ASTMD-696	10-4/	1.5	0.8		1.2
Tensile strength	GB/T1040	MPa	39.2	61	40	25
Tensile yield stress	GB/T1040	MPa	22			20
Tensile elongation at break	GB/T1040	%	≥350	60-300	60-120	≥350
The impact on the Gap of simply supported beam	GB/T1043	KJ/m	Continuously	5.9-10.8	10	27
Rockwell hardness	GB/T9342		40	85-120		33
Friction coefficient	Three petrochemical Law		0.05-0.11	0.37	0.4-0.6	0.4	0.58
Wear rate	Three petrochemical Law	%	21	100	210	210	140
Scaling			Non- scaling				Scaling
Corrosion-resistant			Merit	Average	Average	Average	Average