CO2 Glass Laser Tube Power Supply
USD $188 - $245 /Piece
Min.Order:1 Piece
* Introduction
This power supply is exclusively designed for CO2 laser machine. The output current can be set by user within the max one.
* Specifications:
Working Environment Condition | Temperature | -10 ~ +40 °C |
Moisture | ≤85% | |
Output | Voltage | Max DC35KV |
Current | DC (0~28) mA | |
Input | L, N and PE Wires, 50Hz 220V±10% | |
Accuracy | 2% | |
Efficiency | 95% | |
Protected Current | 28±1mA | |
Response Time | 0.2 ms | |
Switch | O and 1, TTL | |
Power Adjustment | 0~5V analog or PWM signal | |
Size | 245×185×100 mm | |
Weight | Net 3.1 Kg, Gross 3.5Kg |
* Wirings
- Connect the RED wire to the laser tube positive end
- Connect the BLACK wire to the laser tube negative end
- Details refer to the Port Definition diagrams
* Caution
- Keep minimum 100 mm clear space out of the cooling fan!
- Be careful with GND connection for the laser machine!
- Must connect the RED wire to the laser tube positive end before power on!
- Must connect the Neutral wire. Three-end plug should be applied with FG≤10Ω
* The Port Definitions
Port | Definition |
| Port | Definition |
5V | Internal +5V |
| H | Active-high |
IN | Power Control, 0~5V analog or PWM |
| AC/L | Live Wire |
G | Working Ground |
| AC/N | Working Neutral wire |
P | Water Protection Switch |
| FG | Grounding for Safety |
L | Active-low |
|
|
|
DHL, TNT, FedEx air express
12-month product warranty