Product Details

RS-25-5 25w 5v 5a 88-264VAC single output power supplies

1. Features

1. All using 105°C ling life electrolytic capacitors

2. Protections: Short circuit/ OLP/ OVP

3. Withstand 300VAC surge input for 5 seconds.

4. High operating temperature up to 70°C withstand 5G vibration test,

5. Miniature size, high power density

6. High efficiency, ling life and high reliability

7. 100% full load burn-in test

8. Suitable for cirtical applications

9. 2 years warranty

10. RS-25 Single Output Switching Power Supply SMPS

2. Specification

MODEL		RS-25-3.3	RS-25-5	RS-25-12	RS-25-15	RS-25-24	RS-25-48
OUTPUT	DC VOLTAGE	3.3V	5V	12V	15V	24V	48V
	CURRENT RANGE	0 ~ 6A	0 ~ 5A	0 ~ 2.1A	0 ~ 1.7A	0 ~ 1.1A	0~ 0.57A
	RATED CURRENT	6A	5A	2.1A	1.7A	1.1A	0.57A
	RATED POWER	19.8W	25W	25.2W	25.5W	26.4W	27.36W
	RIPPLE & NOISE (max.) Note.2	80mVp-p	80mVp-p	120mVp-p	120mVp-p	120mVp-p	200mVp-p
	VOLTAGE ADJ. RANGE	2.85 ~ 3.6V	4.75 ~ 5.5V	10.8 ~ 13.2V	13.5 ~ 16.5V	22 ~ 27.6V	42 ~ 54V
	VOLTAGE TOLERANCE NOTE.3	3.0%	2.0%	1.0%	1.0%	1.0%	1.0%
	LINE REGULATION	0.5%
	LOAD REGULATION	2.0%	1.0%	0.5%	0.5%	0.5%	0.5%
	SETUP, RISE TIME NOTE.5	1800ms, 23ms/230VAC 4000ms, 30ms/115VAC at full load
	HOLD UP TIME (Typ.)	80ms/230VAC 14ms/115VAC at full load
INPUT	VOLTAGE RANGE	88 ~ 264VAC 125 ~ 373VDC (Withstand 300VAC surge for 5sec. Without damage)
	FREQUENCY RANGE	47 ~ 63Hz
	EFFICIENCY (Typ.)	73.5%	78.5%	81.5%	83.5%	86%	85%
	AC CURRENT (Typ.)	0.7A/115VAC 0.4A/230VAC
	INRUSH CURRENT (Typ.)	COLD START 30A/230VAC
	LEAKAGE CURRENT
PROTECTION	OVER LOAD	110 ~ 180% rated output power
	OVER LOAD	Protection type : Hiccup mode, recovers automatically after fault condition is removed
	OVER VOLTAGE	3.8 ~ 4.45V	5.75 ~ 6.75V	13.8 ~ 16.2V	17.25 ~ 20.25V	28.4 ~ 32.4V	55.2 ~ 64.8V
	OVER VOLTAGE	Protection type : Shut off o/p voltage, clamping by zener diode
ENVIRONMENT	WORKING TEMP.	-20 ~ +70^oCl (Refer to output load derating curve)
	WORKING HUMIDITY	20 ~ 90% RH non-condensing
	STORAGE TEMP., HUMIDITY	-40 ~ +85^oCl , 10 ~ 95% RH
	TEMP. COEFFICIENT	0.03%/ ^oCl(0 ~ 50^oCl)
	VIBRATION	10 ~ 500Hz, 5G 10min./1cycle, period for 60min. each along X, Y, Z axes
SAFETY &EMC(Note 4)	SAFETY STANDARDS	UL60950-1, TUV EN60950-1 approved
	WITHSTAND VOLTAGE	I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
	ISOLATION RESISTANCE	I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH
	EMI CONDUCTION & RADIATION	Compliance to EN55022 (CISPR22) Class B
	HARMONIC CURRENT	Compliance to EN61000-3-2,-3
	EMS IMMUNITY	Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, light industry level, criteria A
OTHERS	MTBF	309.7Khrs min. MIL-HDBK-217F (25 )
	DIMENSION	*785128mm (LWH)*
	PACKING	0.2Kg; 60pcs/13Kg/0.46CUFT

3.Please Note:

1. The testing condition for the parameter above is: 230VAC input, rated load, 25°C 70%Rh, Humidity.

2. Error, include the setting error, line stability and load stability.

3. Wave test: adopting "A12" double wire for 20MHZ, and 0.1uF&uF capacitor short-circuit for interrupting.

4. Inlet Voltage Stability test: when is over load, the lowest voltage of inler is representative to the highest voltage.

5. Load stability test: the load is from 0% to 100%, others 60%.

6. Total output canbe maximum Current, total load can not exceed the maximum output power.

4.More models: