Name: RS 25W 15V 1.7A Smallest Single Output Switching Power Supply yueqing
Brand: WINSTON
Availability: InStock

Product Details

25W yueqing Winston RS-25 series

Features

Universal AC input / Full range

Protections: Short circuit / Overload / Over voltage

Cooling by free air convection

LED indicator for power on

100% full load burn-in test

All using 105°C long life electrolytic capacitors

Withstand 300VAC surge input for 5 second

High operating temperature up to 70°C

Withstand 5G vibration test

No load power consumption less than 0.5W

High efficiency, long life and high reliability

3 years warranty

meanwell RS-25-15 25w power supply switching

SPECIFICATION

MODEL		RS-25-15
OUTPUT	DC VOLTAGE	15V
	RATED CURRENT	1.7A
	CURRENT RANGE	0 ~ 1.7A
	RATED POWER	25.5W
	RIPPLE & NOISE (max.) Note.2	120mVp-p
	VOLTAGE ADJ. RANGE	13.5 ~ 16.5V
	VOLTAGE TOLERANCE Note.3	±1.0%
	LINE REGULATION Note.4	±0.5%
	LOAD REGULATION Note.5	±0.5%
	SETUP, RISE TIME	1800ms, 23ms/230VAC 4000ms, 30ms/115VAC at full load
	HOLD UP TIME (Typ.)	80ms/230VAC 14ms/115VAC at full load
INPUT	VOLTAGE RANGE	88 ~ 264VAC 125 ~ 373VDC (Withstand 300VAC surge for 5sec. Without damage)
	FREQUENCY RANGE	47 ~ 63Hz
	EFFICIENCY (Typ.)	83.5%
	AC CURRENT (Typ.)	0.7A/115VAC 0.4A/230VAC
	INRUSH CURRENT(Typ.)	COLD START 30A/230VAC
	LEAKAGE CURRENT
PROTECTION	OVER LOAD	110 ~ 180% rated output power
	OVER LOAD	Protection type : Hiccup mode, recovers automatically after fault condition is removed
	OVER VOLTAGE	17.25 ~ 20.25V
	OVER VOLTAGE	Protection type : Shut off o/p voltage, clamping by zener diode
ENVIRONMENT	WORKING TEMP.	-20 ~ +70°C (Refer to derating curve)
	WORKING HUMIDITY	20 ~ 90% RH non-condensing
	STORAGE TEMP., HUMIDITY	-40 ~ +85°C , 10 ~ 95% RH
	TEMP. COEFFICIENT	±0.03%/°C (0~50°C)
	VIBRATION	10 ~ 500Hz, 5G 10min./1cycle, 60min. each along X, Y, Z axes
SAFETY & EMC (Note 6)	SAFETY STANDARDS Note.6	UL60950-1, TUV EN60950-1 approved
	WITHSTAND VOLTAGE	-I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
	ISOLATION RESISTANCE	I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25°C/ 70% RH
	EMC EMISSION	Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3
	EMC IMMUNITY	Compliance to EN61000-4-2,3,4,5,6,8,11, light industry level, criteria A
OTHERS	MTBF	309.7Khrs min. MIL-HDBK-217F (25°C )
	DIMENSION	785128mm (LWH)
	PACKING	0.2Kg; 60pcs/13Kg/0.46CUFT
NOTE	1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance: includes set up tolerance, line regulation and load regulation. 4. Line regulation is measured from low line to high line at rated load. 5. Load regulation is measured from 0% to 100% rated load. 6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.