sell 250tph roller press for different production line
Negotiable /Set
Min.Order:1 Set
Jiangsu Pengfei Group Co., Ltd.
Sell 250tph roller press for different production line
sales manager:Alisa lee
tel:+8613962785125
1.General condition
Rolling machine is developed in the middle of 1980s',which is a new cement and saved energy powder grinding equipment.it can displace the low efficiency and high consumption ball mill in part or uce the steel consumption and noise,it's subitable to not only new plant construction but also technical revision of old plant,raise the output by 40 to 60 percent and reduce the power consumption by 30 to 50 percenet.the material which its fineness is 0.8mm covers 20 to 35 percent after squeeezing the material.the fineness is less than 20mm which is covered 65 to 85 percent.the inner structure of small lump is filled with microdefect.improve the easy abrasivity. the rolle rface is heat weld buildup.it is easy to maintenance is the abrasive layer.
2.The technical parameter
2.1The roller diameter is 1400mm
2.2The roller width is 450mm
2.3The working normal gap is 16-35mm
2.4The Max feeding size is 65mm
2.5 The Grinding capacity is 200-250t/h for clinker,230-260t/h for raw material.
2.6The motor type is Y355L-8,The power is 220X2kW.The speed is 750r/min,the working voltage is 380V
2.7The total weight is 73t
3.The certification and maching unit