Specifications

our products have been sold well all over the country and exported to more than 40 countries and areas such as Germany, Russia

φ3.2×13m Slag Mill

(edge drive)

   Relative technical parameter and performances

   1,Specification φ3.2×13m

   2,Productive capacity 23-28t/h(open circuit,slag grain size≤25mm,inlet moisture ≤0.5%,inlet temperature ≤50°C,mill air speed 1.1-1.2m/s,surface area ≥420m²/kg)

   3,Mill rotating speed 18.7r/min

   4,Grinding media load 126t

   5,Main motor

       Model YR1600-8/ power 1600kW rotating speed 743r/min

       Voltage 10KV

   6,Main reducer

       Model MBY1000 hard tooth      

       Input rotating speed 740r/min speed ratio i=7.15

   7,Auxiliary motor

   Model YEJ225M-8 power 22kW rotating speed 740r/min

   8,Auxiliary reducer

   Model ZSY315-Ⅱ speed ratio i=100 input rotating speed 740r/min

   9,Cooling type water cooling

   10,Lubrication thin oil station(GYXZ-40A)

   (1)Low pressure system

   Flow 40L/min oil supply pressure 0.4MPa pump model CB-B63

   Oil supply temperature 40±3°C

   Motor Y112M-6 B35 2.2kW

   (2)High pressure system

   Pump model 2.5MCY14-18

   Flow 2.5L/min

   Oil supply pressure 32MPa

   Motor Y112M-6 2.2kW

   (3)others

   Oil box volume 1m³

   filtering accuracy 0.08mm

   filtering area 0.19m²

   cooling area  5m²

   cooling water consumpation  3.6m³/h

   heater power 3kW×3

   working media  N22-N320