Specifications

1.the roller press is used for grinding clinker,raw material and etc.
2.ther roller press has 2 rollers

Sell 150tph roller press for different production line

 

                             contact person(sales manager):Alisa lee
                                                                                    tel:+8613962785125

our company mainly produce cement making machinery,ball mill,rotary kiln,Bag house,ESP,belt conveyor,bucket elevator and anwhile our company also can produce blast furnace,nickel iron smelting process equipment.

1.General condition

      Rolling machine is developed in the middle of 1980s',which is a new cement and saved energy powder grinding equipment.it can displace the low efficiency and high consumption ball mill in part or uce the steel consumption and noise,it's subitable to not only new plant construction but also technical revision of old plant,raise the output by 40 to 60 percent and reduce the power consumption by 30 to 50 percenet.the material which its fineness is 0.8mm covers 20 to 35 percent after squeeezing the material.the fineness is less than 20mm which is covered 65 to 85 percent.the inner structure of small lump is filled with microdefect.improve the easy abrasivity. the rolle rface is heat weld buildup.it is easy to maintenance is the abrasive layer.

2.The technical parameter

2.1The roller diameter is 1200mm

2.2The roller width is 450mm

2.3The working normal gap is 16-30mm

2.4The Max feeding size is 60mm

2.5 The Grinding capacity is 110150t/h for clinker,130-175t/h for raw material.

2.6The motor type is Y355L-8,The power is 220X2kW.The speed is 750r/min,the working voltage is 380V

2.7The total weight is 73t 

3.The certification and maching unit