Specifications
Ball mill can be used for cement plant, metallurgical, chemical works, power plant and environmental protection industries.φ2.6×13m Cement mill
Edge drive
Relative technical parameter and performance
1Specificationφ2.6×13m
2ModelMGX2613
3Productive capacity24-30t/hopen circuit,OPC,inlet grain ize:not more than 25mm,inlet moisture:≤0.5%,fineness of finished products:≥300m2/kg,air speed inside mill:1-1.2m/s.
4Rotating speed of mill:20.6r/min
5Main motor(TECO)
Model:YR1000-8/1180
Power1000kW
Voltage:6000V/10000V
6Main gear boxJDX800 i=6.3333 Chongqi Gearbox
7Auxiliary motor:
Model:YEJ200L-8
Power:15kW
Rotating speed:730r/min
8Auxiliary reducerTaixing Reducer Plant
ModelZSY250-I/
Speed ratio:i=100
9 Cooling type: water cooling
10Lubrication type: thin oil stationXGD-A2.5/40
1Low pressure system
Flow40L/min oil supply pressure0.4MPa
Oil supply temperature40±3
MotorY100L-4 3kW
2High pressure system
Flow2.5L/min
Oil supply pressure32MPa
MotorY112M-6 2.2kW
3Other performation
Oil box volume1m3
Filtering accuracy0.08mm
Filtering area0.19m2
Cooling area5m2
Cooling water consumption3.6m3/h
Heater power3kW×3
Working mediaN22-N320