Specifications

Four-level puzzle mechanical parking equipment:
1.Less occupied area.
2.The design is flexible.
3.Multiple protection device.

PSH Four-level puzzle mechanical parking equipment

 

1. Advantage and Application

(1)The equipment utilizes steel wire to lift, it can be designed into 3 layers to 6 layers.

(2)It has better utilization ratio of the space than the other common parking systems and more suitable for outdoors.

(3) Big span design and PLC controlling are good for environmental protection and energy-saving.

 

2. Layout

Each group of controlling of this parking system is designed into 3-car to 6-car, just depending on specific site conditions.

 

3.Working Principle

The entrance of this type is on the ground floor, the car boards on the top layer can only be lifted, the car boards on the bottom layer can only be slid, and car boards on the middle layers can be both lifted and sild. The middle layers had empty spaces, so that the car boards could be slid, and let the vehicle above down to the ground floor to be picked. The vehicles on the bottom layer can be driven out directly.

 

4.Safety Performance

4-point safety device on the ground and underground; independent car-resistant device, over-length, over-range and over-time detection, crossing section protection, with extra wire detection device.

 

5.Technical Parameters

Name		Instruction
Layer		Upper layer	Middle layer	Ground layer
Vehicle Size	Length	5000(mm)	5000(mm)	5200(mm)
	Width	1850(mm)	1850(mm)	1900(mm)
	Height	1550(mm)	1550(mm)	2050(mm)
Vehicle Weight		1700(kg)	1700(kg)	2000(kg)
Lifting	Power	2.2(kw)
	Speed	5.5-6(m/min)
Sliding	Power	0.2(kw)
	Speed	8(m/min)
Driven Mode		Electric machine+Cycle chain+ Steel wire rope
Operation Mode		Button, Automatic, Manual
Power Supply		AC380V/220V50Hz; 3¢380V/220V50Hz