Specifications

lead acid battery
1. tubular battery
2. deep cycle
3. long life

 

GFME series valve-regulated sealed lead-acid batteries for fixation designed in accordance with Japanese standards has a service life of over 15 years (2.24V/monomer•25ºC floating use).

 

The products (6 specifications from 200Ah to 1,000Ah) are developed and made by new technology, new material and sophisticated equipment, and has passed the approval of related departments, reaching domestic advanced level. Partial performances have been in line with the standards of international like products. With a newly-designed integral structure, the products have been popular with users by its high quality, high performance and high reliability since it launched into the market.

 

Applications 

1. Standby power supply for communication and signal systems; 2.Standby power supply for electric power system, energy storage of solar and wind power generation. 3 Standby power supply for UPS, emergent lightings, etc. Features 4 Grid: It is made of special Pb-Ca alloy with excellent corrosion resistance and optimized in structure, enable current to uniformly distribute on a polar plate, reduce the voltage drop of the polar plate, increase the discharge performance of the battery, and have extremely low self discharge rate and long life span. 5 Polar Plate: It is compounded by special active materials, have the capabilities of increasing the utilization ratio of the active materials and improving the large-current discharge performance and charging acceptance of the battery, and satisfy the use requirements of large-current impact discharge. 6 Baffle Plate: High-quality AGM baffle plates with high porosity, low resistance and corrosion resistance, sufficient in electrolyte and excellent in high rate discharge performance. 7 Electrolyte: With high purity and capability of increasing the utilization ratio of the active materials and reducing the self discharge of the battery. 8Safety Valve: It is made from flame-retardant ABS materials at its valve body, with unique structural design, accurate opening and closing pressure and capability of guaranteeing the safe and reliable operation of the battery. 9 Battery Jar and Cover: It is made from flame-retardant ABS materials, with high strength, corrosion resistance and bright and glossy appearance. 10.Terminal Post: Improve the load capability of terminal current and have small battery internal resistance through being embedded with a large-diameter copper core. The terminal post and the battery cover are sealed both by mechanical sealing and sealant for completely sealing the battery and avoiding acid leakage. 11 Single Battery: It is composed of a single grid (a middle grid is arranged in a battery with larger capacity for guaranteeing the strength of the battery jar, and the interior of the battery is still connected in parallel), effectively guaranteeing the equilibrium of electric performance. An electrode cluster positioning device is arranged in the interior of the battery for guaranteeing the consistent compression on the baffle plates and uniform distribution of acid liquor. 12 Battery Pack: The exterior of the battery is sealed by copper-core flexible cables for preventing the battery terminal and connecting strips from oxidizing and corroding. The batteries can be used by combining into a rack or being installed on the ground, and the installation mode is flexible and diversified, safe and reliable.

 

 

Battery Type	Rated voltage	Rated Capacity			Maximum Dimensions				Weight
		10h	3h	1h	Long	Wide	High slot	Overall height
		Termination voltage	Termination voltage	Termination voltage
		1.80V	1.80V	1.75V
GFM-200E	2	200	150	110	106	170	327	351	16
GFM-300E	2	300	225	165	150				22
GFM-400E	2	400	300	220	194				30
GFM-500E	2	500	375	275	240				36
GFM-800E	2	800	600	440	379				56
GFM-1000E	2	1000	750	550	469				70