Specifications

HV and EHV premould outdoor cable termination
1. Supplier of CMEC, Sinohydro
2. ISO certified
3. KEMA Report
4. IEC standard

HV and EHV premould outdoor cable termination  

 

Introduction:
48/66kV, 64/110kV, 76/138kV

Model No.: YJZWI4

 

Test Standard:

IEC60840

 

Each product will carry out the delivery test in high-voltage lab of the company.

a. Partial discharge test                       b. Voltage withstand test

 

The product is dry type pre-mould termination and made of imported silicone rubber material. The product is pre-formed in the factory and adopts a seamless manufacturing process. It greatly increased the mechanical and electrical performance of the termination. It integrated with semi-conductive silicone rubber stress cone and improved electrical field of the cutting place of cable end screen.

 

The Main Feature:
Good weather resistant, anti-tracking, electrical corrosion and drain off water performance. Ensure the termination can be run in bad weather condition and high pollution zone safely.

It can installed both vertically and horizontally. Easy to install and maintain.

No danger of explosion.

The termination is whole dry type, no oil. It can avoid oil leakage and other related accidents during running.

 

Rated voltage applicable cable dimension

Rated Voltage	Cable Section
66kV	150-1600mm2
110kV	240-2000mm2
138kV	240-2000mm2
220kV	240-3000mm2
500kV	800-3000mm2

 

 

When ordering, please state the following data:

1). Voltage

2). Conductor material copper or aluminum

3). Conductor cross section diameter

4). Diameter of insulation

5). Outer diameter of cable

 

Quality warranty & after sales service:

1. Secure prodction under ISO9001 & ISO14001 and OHSAS 18001 system;

2. 2-year warranty;

3. Can provide service of installation or training your installation workers.

4. Service Life: 30 years