Specifications

HV and EHV GIS cable termination
1. Supplier of CMEC
2. ISO certified
3. KEMA Report
4. IEC standard

HV and EHV GIS cable termination

 

 

Introduction:
48/66kV, 64/110kV, 76/138kV, 127/220kV, 290/500kV

 

Model No.: YJZGG, YJZGG(D)-B

 

 

 

Test Standard:

 

IEC60859, IEC62271-209

 

Each product will carry out the routine test in high-voltage lab of the company.

 

a. Partial discharge test                       b. Voltage withstand test

 

 

 

The product is XLPE cable indoor termination, and suitable for GIS switchgear / transformer. The GIS termination consists of EPDM stress cone, stress cone bracket, Epoxy busing, connector and wiping sleeve. We have both assembly type and plug-in type.

 

The Main Feature:
The surface pressure between the stress cone and the epoxy bushing is maintained by the spring device(stress cone bracket) so that the press of interface is kept permanently during the course of running. This structure can overcome the disadvantage or defect from material aging.

 

The termination is whole dry type, no oil, eliminate the problem of leakage.

 

Compact, lightweight, and small volume, Easy to install.

 

Rated voltage applicable cable dimension

Rated Voltage	Cable Section
66kV	150-1600mm2
110kV	240-2000mm2
138kV	240-2000mm2
220kV	240-3000mm2
500kV	800-3000mm2

 

 

When ordering, please state the following data:

1). Voltage

2). Conductor material copper or aluminum

3). Conductor cross section diameter

4). Diameter of insulation

5). Outer diameter of cable

 

Quality warranty & after sales service:

1. Secure prodction under ISO9001 & ISO14001 and OHSAS 18001 system;

2. 2-year warranty;

3. Can provide service of installation or training your installation workers.

4. Service Life: 30 years