Gigabit GPON ONU ONT SFU ftth RJ45 SC/PC huawei 5680t compatiblity
Negotiable /Unit
Min.Order:1 Unit
Shenzhen FH-Net Optoelectronics Co., Ltd.
Introduction
GPON SFU is designed for FTTH and networking service providers. FHR2100GKW is developed by FH-net Optoelectronics based on the Gigabit GPON technology, has a high cost performance. It is high stability and easy to maintain, has multi-service QoS quality guarantee. And It is fully compliant with technical regulations such as ITU-T G.984.x and technical requirement of GPON Equipment (V2.1 and above version) from China Telecom, China Unicom.
Characteristics
Main service: 1GE
Plug and play, integrate auto detection, auto configuration and auto firmware upgrading
Integrate OMCI and TR-069 remote configuration and maintenance
Support diagnostic monitoring and remote disabling of fiber optical
Compatible with Huawei, ZTE and Fiberhome OLT
Specification
Technical items | Descriptions |
Fiber port | 1 GPON interface, SC single-mode/single-fiber, Downstream rate 1.25Gbps, Upstream rate 1.25Gbps |
Wavelength | Tx 1310nm, Rx 1490nm |
Fiber interface | SC/PC |
RX sensitivity | <-28dBm (1490nm) |
WLAN | IEEE802.11b/g/n,300Mbps, a built-in antenna |
LAN | 1*10/100/1000Mbps adaptive Ethernet ports, full/half duplex, RJ45 interface |
Throughput | Throughput can reach 900Mbps or more |
POTS | 1*FXS, RJ11 connector |
DC power | 12V 1A, external AC-DC power adapter |
Button | Reset, power |
Power | ≤8W |
Operation | Working temperature: -5+55℃ working humidity:10-90%(non-condensation) |
Storage | Storage temperature: -30℃+60℃ storage humidity: 10-90%(non-condensation) |
Dimension | 104*89*29mm(length*width*height) |
Net weight | ≤0.2Kg |
Data Service Functions
Full speed 1G non-blocking switching
2048 MAC address table
Integrated port monitoring, port mirroring, port rate limiting, port SLA, etc
Support auto polarity detection of Ethernet ports (AUTO MDIX)
Integrated IEEE802.1p QoS with four level priority queues
Application chart