Product Details

FHR2210K GPON ONT/HGU

Introduction

GPON ONT/HGU is designed for FTTH and networking service providers. FHR2210K is developed by FH-net Optoelectronics based on the Gigabit EPON technology, has a high cost performance, it supports 2 layer, 3 layer or more layer VoIP. It is high stability and easy to maintain, has multi-service QoS quality guarantee. And It is fully compliant with technical regulations such as IEEE802.3ah and technical requirement of GPON Equipment from China Telecom, China Unicom.

Characteristics

Main service: 1GE+1FE+1VOIP
Plug and play, integrate auto detection, auto configuration and auto firmware upgrading
Integrate OMCI and TR-069 remote configuration and maintenance
Support flexible QinQ VLAN,DHCP server/relay and IGMP/ MLD multicast monitoring function
Support diagnostic monitoring and remote disabling of fiber optical
Compatible with Huawei,ZTE and Fiberhome OLT
Support NAT and firewall function
POTS integrated circuit test complies GR-909
WAN support networking bridge, router and bridge/router mixed mode

Specification

Technical items	Descriptions
Fiber port	1 GPON interface, SC single-mode/single-fiber, Downstream rate 2.5Gbps, Upstream rate 1.25Gbps
Wavelength	Tx 1310nm, Rx 1490nm
Fiber interface	SC/PC
RX sensitivity	<-27dBm (1490nm)
LAN	110/100/1000Mbps+110/100Mbps adaptive ethernet ports, full/half duplex, RJ45 interface
POTS	1*FXS, RJ11 connector
DC power	12V 1A, external AC-DC power adapter
Button	Reset, power, WIFI
Power	≤10W
Operation	Working temperature: -5~+55℃ working humidity:10~90%(non-condensation)
Storage	Storage temperature: -30℃~+60℃ storage humidity: 10~90%(non-condensation)
Dimension	13010731mm(lengthwidthhighth)
Net weight	≤0.2Kg

Data Service Functions

Full speed 1G non-blocking switching
2048 MAC address table
16 VLAN
Support VLAN QinQ, transparent, tag, translation, trunk, etc.
Integrated port monitoring, port mirroring, port rate limiting, port SLA, etc
Support auto polarity detection of Ethernet ports (AUTO MDIX)
Integrated IEEE802.1p QoS with four level priority queues
Support IPv4 IGMP snooping and IPv6 MLD snooping
Support bridging, router and bridging/router mixed mode

POTS service function

support SIP voice protocol
support H.248 voice protocol
SIP protocol: ISP provide the port number of the main SIP proxy server and terminal VOIP
Value range is 1-65535, system default value is 5060
H.248 protocol: ISP provide port number of the spare MGC server and VOIP terminal
Value range is 1~65535, system default value is 2944
Port ringing current voltage: 50±10VAC,30±10H
Port type POTS(VOIP)
Support G.711 A-Law/u-Law,G729A/B,G.723.1-5.3/6.3,G.726.etc.voice coding/compressed technology
Support auto switch in main interface and standby interface by the software