Specifications

remove the scales and weld dregs. make it show metal color.increase its ratio surface area,and thus contribute to painting and c

  

 

STEEL PIPE SHOT BLASTING MACHINE NAMELY

 

Usage

 

QG Series Steel pipe Shot dedicated processor inside and outside the wall for the steel and steel products to deal with the outer surface of the shot blasting to remove the oxide layer and debris such as welding slag, showing a metallic luster, to increase their surface area in order to facilitate the work painting and painting. Characteristics: Blast wheel arranged in a suitable location (such as room or the side of body below), the work piece edge to edge into the rotation, will enable the different effect of diameter of the pipe line shot blasting. 

 

 Technical parameters of this type of equipment:

 

 Work piece diameter: Ø10-2800mm   Length :> 6m   Clean-up speed: 0.5~4m   

Can be more than one series, to achieve a higher clearance rate 

 

Introduction 

 

1:Protecting plate   

The cabinet of main impacting district has the high wear-resistant steel manganese 13.This protecting plate is our new research, installing more simply and repairing more conveniently.   

 

 2:Sealed steel import and export 

Given the specific characteristics of the work piece cleaning, shot blasting machine designed for quick exchange of the door of the chamber body. When the clean-up of large-diameter work piece, the replaced door Sandy; When cleaning small diameter of the work piece when the door to put on small-ore.  

 

3:Work piece drive mechanism  

Shot blasting machine of this type can be assigned a variety of work piece drive mechanism, Such as Tire-Ramp Roller and so on. 

 

4:Blast wheel  

This machine's blast wheel installed in the suitable location of the cleaning cabinet (Side or Top). It can be very good clean-up different diameter of the work piece.  

 

5:Shot recycling & purifying system   

This system can be divided into the Abrasive recycling system and purify System, they consist of abrasive hopper, Abrasive conduit, shot valves (Blast wheel Assemblies), screw conveyors, bucket Elevator, abrasive /dust and separator, etc.  

 

6:Dust-removing system  

This system consists of collector, fan and connecting pipes (from the clean-up room, separator to the collector) and so on. Connecting pipe equipped with butterfly valves for regulating the air volume, so that the work of the various parts of equipment to achieve the best state, so that no dust in the course of their work spillover. Another form of Steel pipe surface shot blasting machine. Two Shot Blast wheel in the browser layout of the upper body. Work side of the work piece while rotating through the shot blasting clean-up room.

 

 Other roller through type shot blasting machine Parameter: 

Parameter	Q698	Q6912	Q6915	Q6920	Q6925	Q6930	Q6940
The effective cleaning width(mm)	800	1200	1500	2000	2500	3000	4000
Dimension of inlet opening	1600*800	1200*400	1700*400	2200*400	2700*800	2700*800	4200*400
The length of cleaning work piece(mm)	1200-12000	1200-16000	1200-12000	1200-12000	3000-12000	2400-12000	4500-18000
The speed of conveyer(m/min)	0.5-4	0.5-4	0.5-4	0.5-4	0.5-4	0.5-4	0.5-4
The thickness of cleaning steel sheet (mm)	3-60	3-60	1.5-60	3-60	3-60	3-110	4.5-100
Shot ball flow rate (kg/min)	4*120	4*250	4*250	6*250	6*250	6*360	8*360
The shot ball first loading (kg)	4000	4000	4000	4500	4500	8000	11000

 Steel Pipe Shot Blasting Machine is not a standard machine,  all parameters can be customized, so any further information for Steel Pipe Shot Blasting Machine please contact with us, our skilled engineer team will give you the most professional and cost-effective solutions.

 If you are interested in this equipment, please don't hesitate to contact us!  If the machine is not suitable for your work piece, please tell us the following information:   

1)             The size of work pieces (length, width and height of maximum workpiece, Length, width and  height of minimum work piece?)  

2)                 How many  the weight of maximum and minimum workpiece? 

3)               Please tell us your requirement cleaning efficiency?   

 According to your infomation, the most suitable machines will be designed for your workpieces. 

4: Before and after the work piece cleaning (Compare the photos)

 5: Certification: