Juxin small crusher price is also called Composite crusher. These new machine combines traditional and international advanced design concept&technology. After the several-months' strrugle of our engineering team, new small crusher price has the satisfying effect of testing machine.

Sand crusher price can crush medium hard materials, such as limestone, cement, iron ore, sand stone, quartz, coal gangue and so on. So they are widely used in mining industry, building materials, metually, coal, chemical and other industries.

Sand crusher price can crush medium hard materials, such as limestone, cement, iron ore, sand stone, quartz, coal gangue and so on. So they are widely used in mining industry, building materials, metually, coal, chemical and other industries.

Sand crusher price application:

Sand crusher price specifications:

Sand crusher price Working principle:

Sand crusher price has the same working principle with the PFL series of composite crusher. The massive ore fall into the rejection material basin of the upper crushing chamber rejection from the entrance. The materials are thrown into the wall of cylinder rely on the centrifugal force of the rejection material basin.

 And they will have a violent collision with the counter board installed on the wall. And the materials hit each other to make them crushed and generate a large number of cracks. Then the materials get into the conical rotor cavity and fall down as spiral in cone space to make the ore with cracks getting further crushed through stamping and extrusion.

 As to the gradient between conical rotor and liner, the minor material tend to move down to achieve automatically graded broken form big to small. The materials are blowed by the hammer in the conical rotor cavity and have another collision with the high speed moving block materials. The material flow hit each other to make them crushed through blowing, hitting, shearing, extrusion, thus to improve the crushing efficiency.

 The falling materials from conical rotate cavity get into the lower crushing chamber and rely on the centrifugal force of the rejection material basion to crush the material much smaller. At last, the materials get into the cylindrical rotor to grind the crushed materials for further crushing until they reached the required size.Then the qualifized final products will be discharged from the bottom outlet of the new sand crusher price.

Sand crusher price Advantages
1.Reasonable internal structure;
2.Attractive appearance;

3.Rather attractive satisfying testing effect;
4.Assorted motor model and power.

 Attention 

1, Crusher must be started without load.
2,The machine should be installed under shelter from rain and mustn't be put in the open air directly.
3, Electric motor should be installed in the rear of the crusher and the direction of rotation should be consistent with the crusher. Reverse is forbidden.
4, For the convenient transportation of the crude material , inputing or outputing materials had better use mechanized transport equipment.
5,Before debugging the equipment, we should tighten the screws and connect parts and check the lubrication conditions.
6, Feeding must be stopped before stopping the machine. Only all the material have been broken is spit out entirely, stopping working is available.