Product Details

Product photo

Product Description

Introduction of stone hammer crusher

stone hammer crusher is also called Hammer Mill Breaker. stone hammer crusher regarded as the preferred equipments in small sand production line because they have the features of less investment, high efficiency.

stone hammer crusher can transform the material form of steel strip and select the discharge. The series of products have the features of small volume, light weight, simple structure, easy operation and maintenance, high ratio of crushing, too little crush, even product size, high producing capacity. hammer miller are suitable for crushing all kinds of brittle, medium hard and compressive strength 150 Mpa.

Operating principle of stone hammer crusher

The motor drives the rotor of hammer crusher rotate at a high speed through the belt. The materials are sent to the entrance of the hammer crusher. They are crushed by the high speed hammer from blowing, impacting, cutting and grinding. Below the rotor, there sieves, the the little size among the crushing products can be discharged through the sieve. The large size products are brought into the crushing area by the hammer from blowing, grinding until they reached the required size. At last, they are discharged through the sieve.

Specifications

	Specifications
Model	Max feeding size (mm)	Discharge Size (mm)	Capacity (t/h)	Power (kw)	Weight (t)	Dimension (mm)
PCΦ400*300	<200	<25	8-15	11	0.8	760800850
PCΦ500*350	<210	<25	12-20	18.5	1.2	8709001020
PCΦ600*400	<250	<30	15-30	22	1.5	110010001230
PCΦ800*600	<300	<30	25-50	55	2	125011701380
PCΦ1000*800	<300	<40	40-80	90	4	145016501800
PCΦ1000*1000	<300	<40	60-120	110	8	215019401920
PCΦ1200*1000	<350	<40	80-150	130	9.8	245019702220
PCΦ1250*1250	<350	<40	90-150	180	16	263021802220
PCΦ1200*1600	<350	<40	100-180	260	23	230021802400
PCΦ1400*1400	<400	<40	120-200	280	32	279028002310
PCΦ1600*1600	<400	<40	150-300	480	37.5	335031202660
The capacity refers to limestone, professing capacity may vary with different materials and feeding size.

Featuresof stone hammer crusher
1)hammer headwork adopt of new technology casting, with wear and impact resistance;
2)adjusting grain size to cater for customers’ need;
3)seal body structure solved the problems of crushing plant dust pollution and gray body leakage;

4)the overall design has attractive appearance, compact structure, less easy damaged parts, easy damaged parts, easy maintenance. The products are upgrade.

Company Information

Our Services

Pre-sale:Enthusiastic

We offer you the early planing of the project,the best process flow design,choose the best appropriate equipment model to design products according to your special needs.

Sale: Integrity
All productds have to pass strict inspection with the drawings and process flow according to the contract before

they go out.We assigned the technicians to the producing spot to provide installation guide, testing and training.

After-sale:Considerate

To establish good business relationship,we adopt periodical visit to the users.We could give you the definite reply during 24 hours when the users meet some problems in the producing process.

Attention

1.We should install the machine under shelter from rain and do not put it in the open air directly.

2.Electric motor should be installed in the rear of the crusher and the direction of rotation should be consistent

with the crusher. Reverse is forbidden.

3.The machine has six ground screws fixed on the concrete flood. The foundation need a place left for

discharging the ore stone and the scope is not less than 50°. The base form should be decided by the users

according the model of the feeder and transportation facilities.

4.Before debugging the equipment, we should tighten the screws and connect parts and check the lubrication

conditions.

5.After launching, the machine should reach normal speed before feeding. The material should be inserted

from the front and do not from the side in case of overload caused the accident.

6.Feeding must be stopped before stopping the machine. Only all the material have been broken is spit out

entirely, stopping working is available.

FAQ

Q:Payment
A:30% by TT as deposit on signing the contract, 70% by as final payment of balance after the client’s satisfactory inspection of the equipment prior to the goods leaving the factory.

Q: What about Warranty? what will we do if the machine is broken down

A: The warranty period for all of structural and mechanical equipment is one year. The warranty period for all electric motors is half one year. Wear parts are not covered by warranty unless the component part is found to be flawed.

Q: What should we need to do for if we want to get a best quotation
A: Hi, if you want us recommend a suitable type for you ,please let us know as follows:
1).the capacity (tons per hour )

2).feed size
3).output size
4).stone type

Q: What could you help me to do for the business ?
A: Many thanks for your trust , we can provide you with proposal chart for complete production lines,spot inspection and operator traning according to your demands and the conditions of applied spot , we can help you choose the right equipments ,drilling rig ,loader ,trucks ,excavators and so on for rotary washer for sand washing.

Q:Delivery time
A:Standard delivery time for stationary crusher plant is 30 days from receipt of deposit,the mobile crusher plant is 45 days.