Specifications

Digital Inclinometer with 12 V-groove Magnets

Brief Description

 

This Digital Protractor(angle measuring device) can be used to measure angles within ±180° (0 ~ 360° ) range in wide variety of applications. Compared with traditional protractors, this protractor has V-groove bottom plate with 12 strong magnets (6 magnets on each side) so that it can firmly attach to any cylindrical surfaces.

 

The protractor is featured with large and clear LCD with Backlight. If the alarm function enabled, the inclinometer will beep when the measured angle is 0° , 10° , 20° ...90° . In addition, the reading is always displayed as upright even the protractor is upside down.

 

Moreover, you can simply place the meter on a reference surface zero to measure relative angle, then it will give a result of measured angle within 0.1° accuracy. With absolute angle measurement, you will able to test whether the working surface is on the level. You can use this function to check roof slopes and wheel alignment etc. This meter works great for miter and table saws, detailed applications are listed as follows.

 

 

Applications

• Automotive
• Drive line Measurement
• Race car wing & chassis adjustment
• Wheel alignment
• Frame straightening
• Industrial
• Machine tool set up
• Lathe and mill alignment
• Quality Assurance verification
• Medical
• Range of motion measurement
• Drive shaft alignment
• Setup of precision machines
• Road or rail-track layout
• Satellite or aerial alignment
• Drainage angles and run-off slopes
• Tool setting on Lathes
• Setting blade angle of Circular Saws
• Setting blade angle of Miter Saws
• Setting work piece angle for milling
• Grader and tractor work alignment
• Platform monitoring
• Suitable for Built wood and metalwork projects
• Create straight edges when assembling furniture
• Ensure wallpaper and cornices are level for decoration
• Measuring and adjusting alignment of sliding carriages and extension tables to cast saw benches
• Check drill press table setting, table saw, jointer table, band saw, jointer fence or band saw table
• Favored by cabinetmakers & furniture workshops for setting up machinery such as saw benches, planer thicknesses, spindle molders and lathes to ensure that they are set true

 

Features

• Base plate has V-groove with 12 built-in magnets for attaching on curved surfaces or cylinders
• Portable design
• Large and clear LCD with backlight
• Fast and accurate measurement
• Degree and Percentage of slope in conversion
• Alarm for angle (0° , 10° , 20° , 30° , 40° , 50° , 60° , 70° , 80° , 90° )
• 360° measurement range allows you to work both horizontal and vertical planes
• Measuring range of 4 x 90° with ±0.1° repeatability
• Large and clear LCD display with 0.1° resolution
• Hold Measured data
• Calibrate button to calibrate the meter to any reference surface
• Display remains upright to enable viewing at all angles
• The unit will directly enter the state of absolute angle measurement every time be turned on (No matter change the batteries)
• Absolute and relative measurement conversion

 

Specifications

• 12 magnets on base plate
• Measuring Range: 4 x 90°
• Resolution: 0.1°
• Repeatability: ±0.1°
• Operating Temperature: 0 ~ 40 °C
• Operating Humidity: 40 ~ 80%
• Power: 3 x 3V CR2032 Batteries (included)
• Dimensions: approx. 158 (L) x 61 (W) x 34 (D) mm (6.22’ x 2.40’ x 1.34’ inch)
• Weight: 548 g (batteries included)

 

One Set Included

• 1 x Digital Protractor
• 3 x 3V CR2032 Batteries (installed)
• 1 x Instruction Manual
• Standard Factory Package