Specifications

Wires & Cables Bunch Vertical Flaming Tester

1. Test Chamber size: W 1000 * D2000 * H 4000 mm
2. Air inlet hole: The air inlet hole at the 150mm of the front wall of the test chamber, which size is 800 * 400 mm
3. Outlet Hole: It shall be at the rear edge of the top of the test chamber, which size is 300 *1000mm
4. Material of Chamber:  It is made by SUB#304 Stainless Steel, Beautiful and Corrosion impedance
5.  Inlet air flow: 5000 ±500L/min
6. Tubular steel ladder: Two types of the ladder, both size is W500mm (standard ladder) and W800mm (Wide ladder),It is with automatic rising and down device which convenient to fix the test sample
7. Gas: High-purity propane gas or liquefied petroleum gas (prepare by user)
8. Burner: Power is 1KW, including 242 round holes which diameter is 1.32mm, with a Venturi mixer for automatic ignition
9. Environment: This test equipment should be place in the environment of out wind speed is ≤8m/s and the temperature of the test wall is 5°C—40°C, under this condition for testing
10.  Flaming Timer: The range of the Specimen continuous burning is 0.01-99.99S/M/H setting and display continuously
11.  Gas range of Flow-meter with Glass rotor: 2-20L/min
12. Air range of flow-meter with Glass rotor: 10-100L/min
13.  Accessories:

1) One piece of Handheld anemometer which speed range is 0-30 m/s

2) One piece of Temperature meter for display the temperature value of the test wall, the range is -50~+1200°C

3) Air compressor machine: 1 set