Specifications

Wine bottling machine
1. CE SGS
2. Fill speed: 6000-8000
3. Install training with translator
4. Free replace parts for 1 yea

MIC automatic 4 in 1 Red wine bottling machine

 

wine bottling machine parameters

Model	Capability	Washing Part			Filling Part		Capping part		Power	Dimensions (mm)
	(b/h)	Water Speed	Air Speed	Head No.	Type	Head No.	Type	Head No.	(kw)
		(m³/h)	(m³/min)
CGF30-24-8-8	6000	2.1	1.1	30	cup-type filling	24	cap sealing cap pushing cap pushing	8	6.4	5300×2180×2700
CGF40-30-8-8	8000	2.9	1.3	40	cup-type filling	30	cap sealing cap pushing	8	6.4	6000×2750×270

 

Wine bottling machine Performance:   

1. High efficiency and low cost.

2. Fully automatic control and high hygienic design.

3. Excellent and stable product quality.

4. Saving work space and manpower for users.

5. Easy maintenance and high safety standard.

6. Both plastic anti-counterfeiting cap and aluminum cap can be used in this machine

   Wine bottling machine is packed with export wooden case.

We will offer our technician for oversea wine bottling machine installation and training service.

we can also provide our Sales as translator to your site help the installation and Training. Only to provide the local transportation, accommodation, air tickets (round trip) for Sales will be fine.

Thank you for choosing MICMachinery Company.

 We have doing wine bottling machines for 8 years, after the company recombination, the wine bottling machine we sold to europe, africa, the america states and south america. we can guarantee our bottling machine line for years running with steady working.

We provide 8 hour action, 24hours solution after sale service, in order to avoid the time difference bring the economic and trust lost to our clients.

For Wine bottling machine question:

First of all, before we operate wine bottling machine , to clearly understand the instructions clearly  wine bottling machine , first read through the instructions again, adjust and use the familiar  wine bottling machine , the operating time must be in strict accordance with the instructions to wine bottling machine instructions , pay attention to details of the problem , certainly the details determine success or failure .

 

Secondly , in accordance with the instructions on the machine for regular repair and maintenance of the wine bottling machine fuselage Oil it , so wine bottling machine body as far as possible to protect the reservoir , so that the air can be isolated to avoid wine bottling machine rusty , well protected wine bottling machine body, and this is a way to extend the life of the 3 in1 bottling machine .

 

Once again, we have to pay attention to hot stand -sealing cloth for cleaning, not retained foreign body in the above , to ensure clean  wine bottling machine try to avoid the amount of material for a long time into the mouth of the left cause corrosion .

 

Fourth, we should always check the machine to see contacts at various parts of the machine is good, important to ensure safe use of electricity , no electricity properly to prevent harm .

 

Fifth, if found faulty , we have to turn off the power , when necessary, by pressing the emergency stop button , and then deflated lift cover, and then close the voltage , check the reason , and troubleshooting.

 

Detail picture of wine bottling machine:

 

Washing parts of wine bottling machine:

Sealing part of wine bottling machine

Screwing part of wine bottling machine