Small Size Big power Lintratek brand Long distance coverage high power outdoor 5W wifi amplifier
USD $1 - $100 /Piece
Min.Order:5 Pieces
Foshan Lintratek Technology Co., Ltd.
Indoor wifi booster Lintratek brand wifi signal repeater wireless network wifi booster for home
5W wifi repeater Lintratek brand wireless network wifi booster for home
5W wifi booster wireless network wifi repeater to enhance mobile computer signal
wifi booster indoor wifi signal repeater 5W wifi booster to enhance wifi signal
Small Size Big power Lintratek brand Long distance coverage high power outdoor 5W wifi amplifier
Why do you need to buy repeater/booster?
Cell phone becomes especially helpful when people get into critical situations. In case of emergency a timely call can save somebody's life.
Unfortunately, there are still some places where they can find themselves "out of coverage" ,no signal at all... Usually those places are either too far from the cell phone base station or located inside underground constructions, for example:
How can repeater bring your mobile phone better signal? The outside antenna catches low signal from operator servicer's base station and delivers it to cell phone repeater through the connection cable (coax).
•After the signal is accepted by the mobile repeater, this device amplifies it.
•Then this amplified signal goes through the connection cable (coax) to the inside antenna.
•And after that, the amplified signal transmits to your cell phone.
• Finally, your cell phone will get good signal, never on and off.
A regular cell phone repeater consists of: (full kit)
Product specification:
Installation Guide
Step 1:Connect Antenna to the Wi-Fi Booster.
CAUTION: The Booster antenna interface canonly connect antenna, Don’t connectto any other wireless products in any case, otherwise it will result in equipment malfunction or damage.
Step 2:Connect Wireless AP/Router or Wireless Network Card to the Wi-Fi Booster.
Tips: Users can also use other shielded cables to connect, but the cable length should be as short as possible, preferably not exceeding 3m.
Step 3:Power up the Wi-Fi Booster.
At first, the color of the LED is green. When the data is being transmitted, the light will turn red.The more dense data transmission, the faster color change of the LED.
Step 4:Adjust the Antenna position and angle,make the Wi-Fi Booster receive the best signal
The adjustment method of the Downlink Gain :
Open the lid of this booster, You will see a Data-chosen-switch, Change the switch status will change the Downlink Gain.
CAUTION:1. The default Downlink gain is 13dB, It is not the higher the better, You must ensure that the final transmit power must not be larger than 36dBm (4w).
2.The Downlink gain is too high may cause the booster not work correctly, The wireless link cannot be successfully connected, or even lead to the booster damage.
3.You need to reduce the Downlink gain when it's combined with a high-power AP/Router.
4.You need to increase the Downlink gain when it's combined with a low-power AP/Router.
The reference Downlink gain setting can be according to the following table:
The transmitting power of the AP/Router | The reference Downlink gain | The final transmission power of the booster |
>26dBm (Dangerous) | 10dB(Dangerous) | >36dBm (Dangerous) |
26dBm | 10dB | 36dBm |
25dBm | 10dB - 11dB | ≤25+11=36dBm |
24dBm | 10dB - 12dB | ≤24+12=36dBm |
23dBm | 10dB - 13dB | ≤23+13=36dBm |
22dBm | 10dB - 14dB | ≤22+14=36dBm |
21dBm | 10dB - 15dB | ≤21+15=36dBm |
20dBm | 10dB - 16dB | ≤20+16=36dBm |
19dBm | 10dB - 17dB | ≤19+17=36dBm |
≤18dBm | 10dB - 17dB | ≤18+17=35dBm |
Mobile repeater packing photo:
Trade Info:
MOQ:5pcs, sample order is welcome
Trade terms: EXW, FOB, CIF
Payment terms: T/T, L/C, western union, paypal, escrow etc.
Payment condition: 30% deposit to confirm production, balance clear before delivery.
Delivery time: 2-5 working days for sample order, 10-30 working days for bulk order
Packing: Neutral carton
Shipping: by sea, by air and by express delivery
Trading process:
After- Sales Service
We have 12 months quality guarantee for all customers, you can return goods to us when receive defective repeater, but air freight charges should be responsible by buyer.
Signal problem & installation technique supporting
1.If still weak signal receipt after installation, please check if outdoor antenna point to signal tower correctly or elsewhere has stronger signal and confirm signal strength achieve-70DBM.
2.If still have no signal after installation, please check our device power adapter whether connected perfectly? And connectors connect well.
3. If strength is not steady, please check if outdoor and indoor antenna is too close; please ensure outdoor antenna has distance of 10 meters at least, with a barrier and not in a same horizontal line.
4. Packed the outdoor connector by waterproof glue, otherwise wet reduce the signal cover area.