Name: LINTRATEK wifi booster Wireless 2Watt Wifi amplifier Access Point Indoor wifi signal Repeater
Brand: LINTRATEK
Availability: InStock

Product Details

Specifications

2Watt 2.4G Wifi Repeater
1)IEEE 802.11b/g/n
2)frequency:2400-2483.5mhz
3)Certificate:CE&RoHs
4)warranty: 1years

Product Description

LINTRATEK wifi booster Wireless 2Watt Wifi amplifier Access Point Indoor wifi signal Repeater

Product Features:

1.IEEE 802.11b/g/n compatible

2.High receiving sensitivity and high transmitting power(2W)

3.Increase your wireless coverage and throughput

4.Works with Most Wireless Access Point/Routers or Wireless Network Card

5.Easy to install and use

6.Ideal for use detachable 2.4GHz antenna equipments

Full kit Accessories

Package Contents:

Open the box carefully,check the following articles:

Parts	Quantity	Description
Wi-Fi Booster	1×	RF610 Pro
Antenna	1×	6 dBi Dipole Antenna
Power supply Adapter	1×	9V DC 1000mA
Shielded cable	1×
User manual	1×
Color Box	1×

Data sheet

Operating frequency	2400-2483.5MHz
Operating mode	TDD
Signal standard	IEEE 802.11b/g/n
Minimum input power	3dBm
Maximum input power	20dBm
Maximum output power	33dBm (2w)
Uplink gain	16dB
Downlink gain	12dB
Noise figure	lower 2.5dB
Delay	<1uS
Operating temperature	-20°C to + 55°C
Weight	129g
AP/Router Interface	SMA Female
Antenna Interface	RP-SMA Male

Installation guide:

Installation Guide

Step 1:Connect Antenna to the Wi-Fi Booster.

CAUTION: The Booster antenna interface canonly connect antenna, Don’t connectto any other wireless products in any case, otherwise it will result in equipment malfunction or damage.

Step 2:Connect Wireless AP/Router or Wireless Network Card to the Wi-Fi Booster.

Tips: Users can also use other shielded cables to connect, but the cable length should be as short as possible, preferably not exceeding 3m.

Step 3:Power up the Wi-Fi Booster.

At first, the color of the LED is green. When the data is being transmitted, the light will turn red.The more dense data transmission, the faster color change of the LED.

Step 4:Adjust the Antenna position and angle,make the Wi-Fi Booster receive the best signal

Tips: You can use third-party software such as Network Stumbler or WirelessMon to detect the signal of Wireless AP/Router / Wireless Network Card, and adjust the antenna angle to achieve the strongest signal.

Attentions:

1.Keep at least 1m distance between Wi-FiBooster antenna and any other 2.4G wireless products,Otherwise may result in equipment malfunction or damage.

2.This type of Wi-Fi Booster is not waterproof, please do not put it in the humid environment.

3.Do not use it where the place surrounded by a large number of metals.which will make the electromagnetic signal blocked.

4.If the user install antenna in the high location, you need to take protection measures for lightning.

5.After the Wi-Fi Booster is turned on, can not remove the Antenna, otherwise may damage the Wi-Fi Booster.