Main Products: mobile signal booster ,cell phone signal repeater ,cellphone signal repeater ,phone signal booster ,wifi signal repeater ,phone signal repeater ,4g signal booster ,lte signal booster
Lcd screen mobile signal repeater,pcs signal repeater with ALC,cell phone signal booster
Negotiable /Piece
Min.Order:5 Pieces
Quick Details View All >
Foshan Lintratek Technology Co., Ltd.
Business Type: Manufacturer
Foshan Guangdong ChinaMain Products: mobile signal booster ,cell phone signal repeater ,cellphone signal repeater ,phone signal booster ,wifi signal repeater ,phone signal repeater ,4g signal booster ,lte signal boosterProduct Details
Lcd screen mobile signal repeater,pcs signal repeater with ALC,cell phone signal booster
1.LCD display,easy to know the signal good or bad
2.Certificate:CE,ROHS,ISO
3.Quality warranty:2 years
Why do you need to buy repeater/booster?
Specification should care about :
| Parameter data | Uplink | Downlink | |
| Frequency Range | GSM | 1710~1910MHz | 1930~1990MHz |
| Output Power | 17 ±2dBm | 20 ±2dBm | |
| Gain | 65 dB | 70 dB | |
| Bandwidth | 25M | ||
| Ripple in Band | GSM≤6dB | ||
| Spurious Emission | 9KHz~1GHz | ≤ -36 dBm | |
| 1GHz~12.75GHz | ≤ -30 dBm | ||
| Noise Figure @ max. gain | ≤ 6 dB | ||
| VSWR | ≤3 | ||
| MTBF | >50000 hours | ||
| Power Supply | AC:100~240V, 50/ 60Hz;DC:5V 1A | ||
| Power Comsumption | < 5W | ||
| Impedance | 50 ohm | ||
| Mechanical Specification | |||
| RF Connector | N-Female N | ||
| Cooling | Heatsink Convection cooling | ||
| Dimensions (D x W xH ) | 135*105*26(mm) | ||
| Weight | < 0.9Kg | ||
| Installation Type | Wall Installation | ||
| Environment Conditions | IP40 | ||
| Humidity | < 90% | ||
| Operating Temperature | -10°C ~ 55°C | ||
How should you install repeater (very easy and simple):
Step 1: Use your mobile phone to test signal strength outside house or on roof, -70dbm is the basic requirement (full bar).
Step 2 Install outdoor antenna in that location and keep adjusting, point it to signal tower station, try to get best signal.
Step3: Run outdoor coaxial cable into building in a convenient location to connect with signal repeater.
step 4: Mount your indoor antenna with signal repeater
step5: Power up signal repeater device to check the signal inside, moving outdoor antenna until you get satisfied signal.
Note: Connect outdoor (BTS) port with outdoor antenna, connect indoor ANT(MS) port with indoor antenna, outdoor antenna is mounted at a higher position. Both antennas should be 10 meters far away from each other at least.
Indoor and outdoor antenna must be separated by wall.
Mobile repeater packing photo:
Contact Supplier
You May Like
New Products
Popular Searches
Recommended Products
Find Similar Products By Category
Facebook
X
Pinterest
Linkedln