Product Details

What is the pcs 1900mhz signal repeater?

Are you suffering from bad signal?

Yeah.... The pcs 1900mhz signal repeater can solve the mobile phone blind or weak signal to keep you in touch with others smoothly in everywhere.

The pcs 1900mhz signal repeater is particularly useful in zones with poor signal,such as basements, car parks and tunnels. It can also be used in offices, homes, supermarkets, cinemas and hotels etc.

Description of pcs 1900mhz Signal Repeater

Parameter data		Uplink	Downlink
Frequency Range	PCS	1850~1910mhz	1930~1990mhz
Output Power		17 ±2dBm	20 ±2dBm
Gain		65 dB	70 dB
Bandwidth		25M
Ripple in Band		PCS≤6dB
Spurious Emission	9KHz~1GHz	≤ -36 dBm
	1GHz~12.75GHz	≤ -30 dBm
Noise Figure @ max. gain		≤ 6 dB
VSWR		≤3
MTBF		>50000 hours
Power Supply		AC:100~240V, 50/ 60Hz;DC:5V 1A
Power Comsumption		< 5W
Impedance		50 ohm
Mechanical Specification
RF Connector		N-Female N
Cooling		Heatsink Convection cooling
Dimensions (D x W xH )		13510526(mm)
Weight		< 0.9Kg
Installation Type		Wall Installation
Environment Conditions		IP40
Humidity		< 90%
Operating Temperature		-10°C ~ 55°C

DCS siganl repeater full kit:

Mobile phone signal booster
Outdoor antenna
Indoor antenna
10 meters outdoor cable, 5 meters for indoor
Connector (N connector, F connector, N to F connector, SMA connector etc)
User manual

How to install GSM/DCS Mobile Signal Repeater?

Step 1: Install the outdoor antenna in a suitable place

Step 2: Connect the outdoor antenna to the booster “outdoor” side by cable and connector

Step 3: Connect the indoor antenna to the booster “indoor” side by cable and connector

Step 4: Connect to the power

Note: Connect outdoor (BTS) port with outdoor antenna, connect indoor ANT(MS) port with indoor antenna, outdoor antenna is mounted at a higher position. Both antennas should be 10 meters far away from each other and must be separated by wall.

Trade process:

Company information:

After - Sales Service

We have 12 months quality guarantee for all customers, you can return goods to us when receive defective repeater, but air freight charges should be responsible by buyer.

Signal problem & installation technique supporting

1.If still weak signal receipt after installation, please check if outdoor antenna point to signal tower correctly or elsewhere has stronger signal and confirm signal strength achieve-70DBM.

2.If still have no signal after installation, please check our device power adapter whether connected perfectly? And connectors connect well.

3. If strength is not steady, please check if outdoor and indoor antenna is too close; please ensure outdoor antenna has distance of 10 meters at least, with a barrier and not in a same horizontal line.

4. Packed the outdoor connector by waterproof glue, otherwise wet reduce the signal cover area.