IP DSLAM, buy MA5616 MSAN Chassis IP DSLAM DSLAM for VDSL2 & ADSL2+ Contact: sherryt@versatek.cn on China Suppliers Mobile

Product Details

OVERVIEW

The MA5616 multi-service access device (hereinafter referred to as the MA5616)

supports the GPON/dual GE upstream transmission and the VDSL2, ADSL2+ and POTS access services.

This document briefly describes the product positioning, characteristics, system architecture, ports, protocols, network applications, device management, and technical specifications of the MA5616.

INTERFACES:

Network interfaces:
1-6 FE ports or 1-6 GE ports
Electrical or optical interfaces
802.3ad port aggregating support
Service interfaces:
64 ports ADSL/ADSL2/ADSL2+ line card
32 ports SHDSL line card
100M/1000M Ethernet access
Hardware ready for FTTP/FTTH EPON
Hardware ready for VDSL2
Hardware ready for WiMAX
• Superior multicast capabilities:
1,000 multicast channels
Powerful IGMP packet processing capability
IGMP pre-join and fast zapping functions
Hierarchical non-block multicast replication
Unique channel preview function
In-service subscriber count
Multicast protocol support: IGMP, IGMP PROXY
Conditional Access based on Port or MAC/IP address

• Refined service awareness and QoS mechanism
Traffic classification based on L1-L7
Rate policing, mirror, redirection, filtering actions, mark 802.1p(3bits) /TOS(3bits) /DSCP(6bits)
according to the classification result
Recognition of subscribers and service types through DHCP Option60/82, PPPoE+, VLAN stacking in
conjunction with upper layer devices
Rate policing, granularity: 64kbps
4/8 priority queues per PORT, scheduling method: PQ/ WRR/ PQ+WRR
• Service wholesale solutions
QinQ support
L2TP support
GRE support
MPLS PE support (in roadmap);

• Layer 2 features
Support Smart-VLAN and Mux-VLAN
4K 802.1Q VLANs and VLAN stacking
16K MAC address table
Port-based MAC address limitation and bindin
802.3ad Port Aggregation
STP/RSTP protocol(802.1D/1W)
• Layer 3 features
Static routing,RIP2,OSPF,BGP-4
DHCP option60/82 and DHCP relay
ARP Proxy

The MA5600 provides various network ports, service ports, and maintenance ports to meet different networking requirements.

Table 1-1 lists the ports provided by the MA5600.

Table 1-1 Ports provided by the MA5600

Port Type	Port Name	Remarks
Network port	FE optical and electrical port	The network port supports the electrical port, single-mode optical port, and multi-mode optical port. They are used to: Connect to the upper layer device. Subtend shelf.
Network port	GE optical and electrical port
Service port	ADSL2+ port	It is compatible with ADSL, and its performance is better than ADSL with respect to: Higher rate. Longer distance. Lower power consumption. More stable operation.
	SHDSL port	It supports the symmetrical transmission. The transmission reach ranges from 3 km to 6 km.
	VDSL2 port	It supports: Discrete multi-tone (DMT) technology. Compatibility with ADSL2+.
	Ethernet port	It provides subtending of the MA5600 shelves.
	ATM port	It supports: STM-1 port. IMA port. ATM access.
Maintenance port	Maintenance serial/network port	These ports are used for local and remote maintenance.
Maintenance port	Environment monitoring port	Through the port, various environment parameters collected by the monitoring device are reported to the host.

Service boards of the MA5600

Board	Name	Function	External Port
ADEF	ADSL2+ over POTS service board	It supports: External SPL ADSL2+ over POTS	64 ADSL2+ ports
ADBF	ADSL2+ over ISDN service board	It supports: External SPL ADSL2+ over ISDN	64 ADSL2+ ports
ADEE	ADSL2+ over POTS service board	It supports: Built-in SPL ADSL2+ over POTS	64 ADSL2+ ports
SHEB	SHDSL.bis service board	It supports SHDSL.bis access.	32 SHDSL ports
SHEA	SHDSL service board	It supports SHDSL access.	32 SHDSL ports
VDEB*	VDSL2 interface board	It supports: Built-in SPL VDSL2 over POTS	32 VDSL ports
VDBD	VDSL2 interface board	It supports: External SPL VDSL2 over ISDN	32 VDSL ports
AIUG*	ATM interface board	It supports: STM-1 access IMA access	4 STM-1 ports or 8 IMA E1 ports
ETHA*	Ethernet subtending board	It is used for GE/FE subtending and provides subtending ports.	8 GE optical/electrical ports or 8 FE optical/electrical ports