XK-CPP
CENTRIFUGAL PUMP TEST BENCH
PRODUCT INTRODUCTION
XK-CPP Centrifugal pump test bench completes the test experiment of characteristic curve of centrifugal pump. The system is equipped with advanced detection methods, including torque sensor, turbine flow meter, differential pressure transmitter and other precision measuring equipment. Control box equips with a variety of measuring instruments, real-time measure the electrical parameters of the system to facilitate the experimental analysis.
The pipeline and instruments of the test bench are made of stainless steel, pipe welding molding, it effectively prevent the corrosion of equipment. The product equips with universal castors, move freely.
TECHNICAL PARAMETERS
Power supply: AC220v/50Hz, with leakage protection, over load protection
Size: 2300*1056*1570mm
Medium temperature: 0~ 70
Ambient temperature: -5~ 40
Storage temperature: -20 ~ 85
Relative humidity: 0~90%rh
MAIN CONFIGURATION
- Single phase capacitor motor
The rated power: 1.5kw
Rated voltage: 220VAC
Rated current: 9.57a
Speed: 1400r/min
The starting capacitance: 200uf
The operation of capacitor: 30uf
- Torque sensor
Range + 5n.m, two positive and negative directions
Output 0~ + 5V
Power 24VDC
- Centrifugal pump
The head: 20m
The flow rate: 6.3m fand /h
Speed: 1450r/min
Equipped with the power: 1.5kw
- Revolving flow meter
The power supply: 3.6V 10Ah lithium battery
The nominal diameter: 25mm
The flow range: 1-10m fand /h
The maximum working pressure: 2.5MPa
TRAINING ITEMS
Familiar with the structure, performance, operation and regulation of the centrifugal pump, and master the working principle of the centrifugal pump
Master the determination method of characteristic curve of centrifugal pump. The characteristic curve of single stage centrifugal pump at constant speed is determined. Draw He-qV,Na-qV,η-qV curve, analysis rated working point of centrifugal pump.
Master the method that flow regulation of centrifugal pump
To master the influence factors of the characteristic curve of centrifugal pump