Product Details

digital target flowmeter, digital flowmeter

Place of Origin Shaanxi, China
Brand Name Yunyi
Model Number LE1

Product Features

digital target flowmeter, digital  flowmeter 

1.  Introduction

 LE1 digital target Flowmeter adopted the newest capacitive force transducer as measurement and sensitive transform element. As well as applied in the newest digital technology and micro electronic technique. So it is a Intelligent Flowmeter, which apply for measuring liquid and gas with high viscosity, low Reynolds number and contains small molecule. So this capacitive force transducer is the key that produced high accuracy and high reliability.

Target Flowmeter is not only have both the characteristics of no moving parts of traditional orifice and vortex Flowmeter, but also have the high accuracy. Combined with its unique anti-interference, impurity resistance, it can application in difficult working condition of the high viscosity/easy to mountains/high temperature/high pressure/high corrosive, etc. at present it has been widely used in steel, oil, natural gas, electric power, papermaking, chemical, energy, food, environmental protection and other fields of flow measurement.

 

2.  scope of application

 

2.1   it is sutible for all kinds nominal diamters. From DN15~DN2000mm or more than.

 

1.2   It is apply for high or low temperature meduim: from -50℃~+260℃

 

2.3   Sutible for low/medium/high pressure: 0~42MPa(gauge pressure)

 

3.  characteristics

 

3.1   no moving parts, sealing surface to reduce, Greatly reduce the leakage rate, easy installation  

 

and maintenance.

 

3.2   Wildely measurement range, the maximum measurement range is 20:1(liquid)or 10:1(gas).

 

3.3   Accurate measurement and high precision, the flanged type precision is 0.2%(liquid) or

 

0.5%(gas).

 

3.4   High sensitively, to measure small flow, the measured low flow speed is 0.08m/s, then the electromagnetic Flowmeter is 0.5m/s.

 

3.5   Good repeatability,  0.05~0.08%, With optional small signal removal, no liner-revision.

 

3.6   Low pressure loss.

 

3.7   Easy to calibration, in addition to the standard device, also can adopt dry calibration.

 

3.8   Low consumption battery display, can read on live.

 

4. target flowmeter selection table

 

LE1

Target Flowmeter

Nominal diameter

(mm)

10

DN10

20

DN20

2000

DN2000

Installed mode

D

Clamped-on type with flange

F

Flange connection type

J

insertion

K

The insertion type can tear open or install on live

L

Tube taper thread connections

Medium

Y

Liquid

Q

Gas

Z

Liquid

Working condition

P

Operating pressure (MPa)

T

Operating temperature(℃)

v

Medium viscosity (Pa·s)

Table body material

T

Carbon steel

B

Steel stainless

F

Stainless steel lining four fluorine

Output signal

L

4~20mA two-wire system

R

RS485 communication protocol

H

Frequency signal

Explosive requirements

B

Exd II BT4

 digital target flowmeter, digital flowmeterdigital target flowmeter, digital flowmeter

 

 

 

You May Like

Find Similar Products By Category

You May Like

View More
Chat Now Contact Now