Pressure gauge manometer

Application of pressure gauge manometer : 

For high accuracy-graranteed within 2% of full scale. indicate low air or non-corrosive gas pressures –eighter positive ,negative(vacuum)of differential. The design resists shock ,vibration and over-pressures no Manometer fluid to evaporate, freeze or cause toxic or leveling problems, it’s inexpensive too .

Specifications of pressure gauge manometer :

1.  Model No.: DPG2000
2.  Name: Differential pressure gauge
3.  Gauge Size: 4"dia. x 2-3/16"deep.
4.  Accuracy: ±2% of Full scale ( ± 3% on 0,-100Pa,-125Pa,100mm and ± 4% on                           -00,-60pa,-6mm ranges)
5.  Range available: -20 inHg to 15 psig, (-0.677 bar to 1.034 bar)
6.  Over pressure : Relief Plug opens at approximately 25psig(1.72bar) standard gauges only
7.  Temperature Limits: 20- 140 °F(-6.67 to 60°C)
8.  Mounting Orientation: Diaphragm in vertical position , cousult factory for other position .
9.  Process connection : 1/8”NPT ,dupliate high and low pressure taps –one pair side and one           pair back .
10. Standard Gauge accessories: include two 1/8”male NPT plugs for duplicate pressure taps,          two 1/8”male NPT pipe thread to Rubber tubing adapters, and three flush mounting                  adapters with screws.