Micro pressure digital pressure gauge 

Description

Differential pressure transmitter is mainly used for HVAC, clean rooms, vacuum boiler, HVAC, wind speed measurement, leak detection, clean room, power plant air pressure, dust, air differential pressure measuring throttle control. Since the application of intelligent circuit, so that the accuracy and stability of the differential pressure measurement has been greatly improved.

Features
   Measurable damp, stale air
   A transmitter can be used for differential pressure, pressure, negative, positive and negative pressure measurements
   Range migration, range migration ratio of 10: 1
   Adjustable damping, by the dynamic pressure effect
   Zero and full point compensation correction
   Output current correction
   Display main transformer unit Optional
   Eliminate the influence of the sensor mounting position
   Output current prescribing, direction selection function
   With self-diagnosis and fault output alarm
   Non-volatile memory with EEPROM data not afraid of power loss

 Technical Specifications

Measuring media: gas
Range: measurement and range depend on the applicability of the sensor, do not exceed the lower limit of the measuring range of the sensor when the migration.
Differential pressure: DP Minimum: 0 ~ 100Pa Maximum: 0 ~ 100KPa
Absolute pressure: AP Minimum: 0 ~ 5KPa maximum: 0 ~ 100KPa
Output: 4 ~ 20mA
Linearity: 0.1%
Repeatability: 0.05%
Hysteresis: 0.05%
Response time: 0.1 to 1.6 seconds (depending on the range and turndown ratio)
Additional adjustable time constant: 0 to 32 seconds
Long-term stability: 0.1% F.S / Year
Temperature coefficient: 0.02% FS / ℃ (in the -40 ~ 85 ℃, zero and span total)
Power supply: 12 ~ 45VDC
Impulse interfaces: M8x1 internal thread or 8 barb Interface
Material: <Sensor>: silicon, glass, PTV
                <Sensor>: Carbon steel plating
                <Sensor>: ABS plastic
Enclosure protection: IP65
Electrical connection: He Tasman joint